Blog spletnega mesta

vidno vsem

As an Auto Parts Wheel Bearing Factory, share with you. 

1.Common causes of high bearing temperature:

1) Insufficient cooling, such as pipeline blockage, inappropriate use of cooler, and poor cooling effect;

2) Poor lubrication, such as insufficient lubrication or excessive lubrication, the quality of lubricating oil does not meet the requirements, deterioration or debris;

3) Large vibration, such as the poor alignment process of the coupling does not meet the requirements, the rotor has dynamic and static imbalances, poor foundation rigidity, virtual feet, rotating stall and surge;

4) The bearing is abnormal, such as bearing damage, the gap adjustment of each part of the bearing box does not meet the requirements, and the bearing assembly process is poor.

Wheel Bearing Assembly


Komentarji

     
    Slika od JACKY XIA
    od JACKY XIA - četrtek, 9. julij 2020, 04:21
    vidno vsem

    Bearings are high-precision objects, and the transportation path is far away. The storage requirements for imported bearings are very strict, regardless of temperature, moderation, and packaging. So what is the scientific way to store bearings? The Wheel Bearing Manufacturer will be announced for us below.

    Wheel Bearing

    Wheel Bearing

    Scientifically store bearings, as long as the relative humidity of the storage room does not exceed 60%, and the temperature does not change much, the bearings can be stored in the original packaging for a long time. After long-term storage of bearings with sealing rings or dust covers, the characteristics of the grease in the bearings may be affected. Bearings taken out of the original packaging should be properly protected to prevent corrosion and contamination. The correct storage method for large rolling bearings is to place the bearings in a horizontal position, and the entire side of the bearing ring should be supported. If the bearing is placed in a vertical position, due to the relatively small thickness of the bearing ring, the weight of the bearing ring and rolling elements may cause permanent deformation of the bearing.

    The scientific storage of bearings is very important. If improper storage leads to bearing rust or bearing corrosion, it is not good. Even if there is no surface damage, then it is possible that such and other failures may occur during the operation of imported bearings, so it must be Bearing storage should be taken seriously.

    In order to ensure the long-term use of the bearing, and in order to maintain its proper performance, regular maintenance is necessary. The first thing to do is regular inspections. Regular inspections can help to find out the existing faults in time, and early detection and repairs can effectively prevent the occurrence of accidents, and can also help improve productivity and economic efficiency.

    When storing it, the city should be careful not to damage the anti-rust coating that was originally provided when it was shipped from the factory. This can help to save effectively, and it is best not to get too wet and temperature if it is stored in a place Generally, it should be kept at about 20 degrees, and it is necessary to avoid direct sunlight as much as possible. In addition, some objects that are too low in temperature should not be touched as well.

    Our company is also selling Wheel Bearing, please contact us.



    Komentarji

       
      vidno vsem

      As a Wheel Bearing Manufacturer, share with you. We know that once the bearing is rusted, it will affect the service life of the bearing, which will also endanger the working efficiency. It will also correspondingly increase the investment of enterprise business capital, so it is very important for enterprises to prevent bearing rust, so what are the methods?

      Wheel Bearing Kits

      Wheel Bearing Kits

      1. A lot of bearing rust is due to the effect of moisture or strong acids and alkalis, which should be eliminated in time.

      When we use diesel, we must choose the quality that meets the standard. It cannot be a poor quality product with too much water content, otherwise it will affect the bearing rust, and at the same time, we cannot wipe the bearing with strong acid and alkali, which can easily cause rust.

      When the bearing is drenched in water, we should use professional motor oil or high-quality diesel for spitting, and then use a thicker plastic film to wrap it. At the same time, it is better to wrap a layer of kraft paper around it, which can prevent moisture, damage, and isolation. Air, so it will not rust.

      2. Anti-rust method during transportation

      Bearings are subject to rainy weather or harsh environments during transportation. It is easy to cause bearing rust. At this time, it is best to wrap the bearing to better achieve sealability, so that it will not be oxidized or corroded due to moisture. It is best to put a layer of plastic material on the outside of the package to prevent moisture from the bearing during transportation.

      Therefore, in our daily use, during storage, or during long-distance transportation, the bearing should pay more attention to moisture and rust or corrosion and rust due to strong acids and alkalis. We must learn to seal the packaging. , Wrapped in plastic or kraft paper to prevent corrosion and rust caused by moisture. Mastering these methods is our reasonable protection of bearing material dependence, and at the same time also depends on ensuring the efficiency of work.

      How to disassemble the bearing

      It is necessary to carry out regular disassembly of the bearing, and regular disassembly of it is to facilitate its maintenance and check whether it is in any condition. If something goes wrong, it is time to replace it. Disassemble. There are special methods for bearings, which cannot be disassembled at will. If there is no installation and disassembly method, then it is easy to cause a certain degree of damage to the machine and bearings. When disassembling the bearing, pay attention to the use of special disassembly tools, and do not damage the components connected to it.

      Our company also has Wheel Bearing Kits for sale, please contact us.


      Komentarji

         
        vidno vsem

        Prefab Space Frame Steel Structure Jiujiang Bridges

        Product Name:

        prefab space frame steel structure  Jiujiang bridges

        Material

        Truss structure, mild steel; Stainless steel, aluminum alloy 6082-T6 truss

        Coating

        Spray Painting; Galvanization;Powder Coated

        Color

        Sliver, White , Darkgray; or as Client's Request

        Finishing treatment

        Hot Dip Galvanization or Painting

        Light steel structure building Steel code

        Q235-B; Q345-B; Stainless steel, aluminum alloy 6082-T6

        Fabrication

        Advanced Automatic Bolt /Welding Machines

        Quality control

        GB/T19001-2000----ISO9001:2000

        Advantages

        1.Stable and Aesthetic
        2.Structure is durable for 50years
        3.Fast and easy to install
        4.Extensive Applications: Storage, Warehouse, Exhibition Hall,Terminal Building, Stadium, Theater, Special-shaped Buildings, etc
        5.High anti-rust performance
        6.Flexible composition: Doors and Day-lighting roof could be  installed at any position

        Jiujiang City Modern Steel Structure Engineering is a with national Steel Structure Engineering Contractor qualification, Light Steel Structure Building manufacturing level of qualification and architectural engineering design B qualification. We can also supply Custom service


        Komentarji

           
          vidno vsem

          China manufacture Fabrication  steel structures for workshop warehouse hangar building

          Item Name

          China manufacture steel structures for workshop warehouse hangar building

          Steel column and beam

          Q345B, welded H section steel

          Purlin

          Q235, galvanizd C section steel

          Light steel structure building Window

          Aluminum alloy window

          Door

          EPS sandwich panel sliding door

          Service

          Design, Fabrication and Installation

          We can make quotation according to customer's drawing or requirement; (size by length/width/height and wind speed), offering a free design drawing and all detailed drawings for installation.

          Design software:  Auto CAD,PKPM,MTS,3D3S, Tarch, Tekla Structures(Xsteel)V12.0.etc

          Packing

          According to customer's requirement

          Load into 40/20GP,40HQ or 40OT

           

          Structure Steel Warehouse advantages
          1. Prefabricated. Fast and easy installation, time saving and labor saving.

          Warehouse Wide span, single or multiple spans, can have a maximum span distance in 36m without middle columns. appearances, different colors for the walls and roof.
          3. Light steel structure warehouse with light weight, easy move and cost saving.
          4. Removable, convenient to assemble or disassemble. Fast construction and easy installation.
          5. Environmentally, recycle, no waste produced.
          6. High strength, can resistance grade 8 earthquake. water proof, fire proof; can resists strong wind and heavy snow.
          7. Long life span. can be used for more than 50 years.
          8. Customized design, can make quotation according to customer's drawing or requirement.Jiujiang City Modern Steel Structure Engineering is a with national Steel Structure Engineering Contractor qualification, Light Steel Structure Building manufacturing level of qualification and architectural engineering design B qualification. We can also supply Custom service.


          Komentarji

             
            vidno vsem

            100sqm-10000sqm Steel Structure Hangar/Warehouse

            Jiujiang City Modern Steel Structure truss has features of high fire resistance, strong corrosion resistance.

            Specifications:
            1) Main Steel: Q345, Q235, Q345B, Q235B etc.
            2) Column & Beam: Welded or Hot rolled H-section
            3) Connection method of steel structure: welding connection or bolt connection
            4) Wall & Roof: EPS, Rockwool, PU sandwich, corrugated steel sheet
            5) Door: Rolled up door or Sliding door
            6) Window: Plastic steel or Aluminum alloy window
            7) Surface: Hot dip galvanized or painted
            8) Crane: 5MT, 10MT, 15MT and more

            Drawings & Quotation of Steel Structure Warehouse custom:
            1) Customized design is welcomed.
            2) In order to give you an exactly quotation and drawings, please let us know length, width, eave height and local weather. We will quote for you promptly.

            The roof and wall can be made of composite panel or veneer. Galvanized sheet metal can prevent rust and corrosion. The use of self-tapping screw can make the connection between the plates more closely, to prevent leakage. You can also use composite panel for roof and wall. The sandwich is polystyrene, glass fiber, rock wool, polyurethane. They have good thermal insulation, heat insulation, fire-retardant. The wall of the steel structure maintenance also can use brick wall. The cost of a brick wall is higher than galvanized steel roof and wall.

            We are a with national steel structure engineering contractor qualification, steel structure manufacturing level of qualification and architectural engineering design B qualification, set light steel and heavy steel structure engineering, Pre Fabricated Steel Building Structures, design, production, construction and installation as one of the central China strength steel construction enterprises.Jiujiang City Modern Steel Structure Engineering is a with national Steel Structure Engineering Contractor qualification, Light Steel Structure Building manufacturing level of qualification and architectural engineering design B qualification. We can also supply Custom service.


            Komentarji

               
              vidno vsem

               Modern Design Prefab Steel Structure Large Stadiums

              Modern Steel Structure designs & delivers all types of steel structures in various options for stadiums, grand stands, ramp buildings, roof covers and other services

               

              Product Name

              Factory direct supply Modern design prefab steel structure large stadiums

              Type

              Modern Steel Structure truss, Spatial Grid Structure, Light Steel Structure, Steel Structure Molding etc

              Materials

              Steel Q235B & Q345B

              Specification

              As per requirement of customer

              Thickness

              As per design

              Light steel structure building Surface Treatment

              Painting & Galvanizing available

              Function

              Warehouse, Workshop, Multi story Building, Building Roof etc

              Packing

              Suitable for Shipment

               

              High quality Modern Steel Structure custom designs & delivers all types of steel structures in various options for stadiums, grand stands, ramp buildings, roof covers and other services:

              Concourse can be designed all around the large steel structure stadiums, so that it makes much easier, and safer to enter and leave the stadium.

              Integration of elevators for easy movement for spectators

              Securing large structures for signs and adverti

              Open air design with a roof system Jiujiang City Modern Steel Structure Engineering is a with national Steel Structure Engineering Contractor qualification, Light Steel Structure Building manufacturing level of qualification and architectural engineering design B qualification. We can also supply Custom service.


              Komentarji

                 
                vidno vsem

                Prefabricated Light High Grade Steel Structure Customized 4S Car Showroom House

                Prefabricated light High Grade Steel Structure customized 4S car showroom expansion project, the earthquake prevention is 6 degrees, and the foundation bearing capacity is FaK=160KPa. The foundation is artificial hole-dug cast-in-place pile, the upper part is steel structure engineering, the portal steel frame, the steel frame column is welded circular tube steel column, and the steel frame beam is H steel beam: the hinge of column foot, the steel frame column and the steel frame beam join together, and the field welding. Wall engineering mainly includes civil engineering and customized  steel structure and most.

                Material: the foundation is C25 hand-dug cast-in-place pile. Column steel column, steel beam using Q345 steel, manual welding Q235 or between Q235 and Q345 using E4301 'E4312 welding rod, q235-b using E43 welding rod, Q345B and q235-b connection using E43 welding rod.

                Ordinary bolts are class C.Steel structure surface shall be divided into bottom, middle and top coating.

                Our Light, Heavy Steel Structure Building can be used for Workshop, Bridge, Large Landscape, Car Showrooms, Refrigerator Preservation Library , high-rise buildings and other large span and safety requirements high, strict quality management and control of engineering project and relying on excellent product quality and engineering quality obtained recognition.More information please view here.Jiujiang City Modern Steel Structure Engineering is a with national Steel Structure Engineering Contractor qualification, Light Steel Structure Building manufacturing level of qualification and architectural engineering design B qualification. We can also supply Custom service.


                Komentarji

                   
                  Slika od Jason Jiao
                  od Jason Jiao - četrtek, 9. julij 2020, 03:55
                  vidno vsem

                  Cotton Herringbone Bleached Fabric

                  Material: 100% cotton

                  Technics: Woven

                  Yarn Count: 40sx40s                 

                  Density: 133x72

                  Style: Herringbone

                  Width: 58/60’’

                  Weight: 100-110gsm

                  Pattern: Bleached

                  Feature: Shrink-Resistant, Tear-Resistant, Anti-Static, Flame Retardant

                  Using:Pocketing, Lining, Shirt, Interlining, Home Textile, bedding

                  Shijiazhuang Tiandeli Import And Export Trade Co., Ltd. (Suzhou Tengo Import And Export Co., Ltd.) is a professional large-scale manufacturer of all types of textile, integrating production and exportation together. Our main products include T/C grey fabrics, 100% cotton and 100% polyester. We can also supply Cotton Fabrics, Bleached Fabrics, white fabric,  dyed fabric, Twill Fabrics, printed fabric , Canvas Fabrics and Plain Fabrics.

                  Woven Cotton Herringbone Bleached Fabric

                  Product Type:

                  Cotton Bleached Fabric

                  Style:

                  Herringbone

                  Technics:

                  Woven

                  Feature:

                  Shrink-Resistant, Anti-Static,Tear-Resistant,Flame Retardant

                  Color:

                  Bleached

                  Width:

                  58/60''

                  Composition

                  Yarn count

                  Density

                  Width

                  Technological

                  Style

                  100% cotton

                  32sx32s

                  68x68

                  44/45" , 58/59"

                  dyed/white/printed

                  plain

                  21sx21s

                  60x58

                  44/45",58/59",62/63''

                  20sx10s

                  40x42

                  62/63''

                  Shijiazhuang Tiandeli Import And Export Trade Co., Ltd (Suzhou Tengo Import And Export Co., Ltd) is a professional large-scale manufacturer of all types of textile, integrating production and exportation together. Our company supply Lining Cotton Herringbone Bleached Fabric, we have a whole set of quality management system. If you have interested in our Polyester Twill Bleached Fabric, pls feel free to contact us.

                  More Product Please View Hifactory.

                   


                  Komentarji

                     
                    Slika od Jason Jiao
                    od Jason Jiao - četrtek, 9. julij 2020, 03:54
                    vidno vsem

                    polyester twill bleached fabric

                    Material: 100% polyester

                    Technics: Woven

                    Yarn Count: 21sx21s,21sx16s

                    Density: 108x58, 120x60

                    Pattern: Bleached

                    Style: Twill

                    Width: 59/60’’

                    Weight: 180-190gsm,220-240gsm

                    Feature: Tear-Resistant, Anti-Static, Flame Retardant

                    Using:Garment, suit, industry, bags, bedding, Home Textile

                    Shijiazhuang Tiandeli Import And Export Trade Co., Ltd. (Suzhou Tengo Import And Export Co., Ltd.) is a professional large-scale manufacturer of all types of textile, integrating production and exportation together. Our main products include T/C grey fabrics, 100% cotton and 100% polyester. We can also supply Cotton Fabrics, Bleached Fabrics, white fabric,  dyed fabric, Twill Fabrics, printed fabric , Canvas Fabrics and Plain Fabrics.

                    Product Type:

                    100% polyester fabric

                    Style:

                    Twill

                    Technics:

                    Woven

                    Feature:

                    Eco-Friendly, Shrink-Resistant, Anti-Static

                    Color:

                    Bleached

                    Width:

                    59/60''

                    Cotton Twill Bleached Fabric

                    Composition

                    Yarn count

                    Density

                    Width

                    Technological

                    Style

                    100% polyester

                    45sx45s

                    110x76

                    44/45" , 58/59"

                    dyed/white/printed

                    plain

                    45sx45s

                    96x72

                    45sx45s

                    88x64

                    24sx24s

                    108x58

                    58/59"

                    dyed/white

                    3/1 twill

                    21sx21s

                    108x58

                    21sx16s

                    120x60

                    100Dx100D

                    110x76

                    58/59''

                    dyed/white

                    herringbone

                    75DX100D

                    133x72

                    Buy low price, high quality Twill Bleached Fabric, choose our Polyester Canvas Grey Fabric, Tiandeli is the leading factory. Warmly welcome new and old customers to visit and patronize!
                    More Product Please View Hifactory.


                    Komentarji