Blog spletnega mesta

Slika od Leslie Luo
od Leslie Luo - nedelja, 28. junij 2020, 07:45
vidno vsem

The aluminum veneer curtain wall uses a high-quality high-strength aluminum alloy sheet. Its structure is mainly composed of panels, ribs, and corner codes. The corner code can be directly formed by bending and punching the panel, or it can be formed by riveting the corner code on the small side of the panel. The reinforcing ribs are connected to the electric welding screws behind the board surface (the screws are directly welded to the back of the board surface), making it a solid whole, which greatly enhances the strength and rigidity of the aluminum veneer curtain wall, ensuring smoothness in long-term use Degrees and wind and earthquake resistance. If sound insulation is needed, high-efficiency sound insulation materials can be installed inside the aluminum plate. Our company provides aluminum ceiling tiles.

The surface of the aluminum panel curtain wall is generally treated with the customization and other pretreatments and then treated with fluorocarbon spraying. Polyvinylidene fluoride resin for fluorocarbon paint topcoat and varnish. Generally divided into two coatings, three coatings or four coatings. Fluorocarbon coating has excellent corrosion resistance and weather resistance, acid rain, salt spray, and various air pollutants, excellent cold and heat resistance, can resist strong ultraviolet radiation, can keep for a long time do not fade, do not powder, long service life.

Aluminum Ceiling Tile

Features of aluminum curtain wall

1) The aluminum panel curtain wall has good rigidity, lightweight, and high strength. The aluminum veneer curtain wallboard has good corrosion resistance, and the fluorocarbon paint can be 25 years old.

2) The aluminum curtain wall has good manufacturability. Using the process first and then painting process, the aluminum plate can be processed into various complex geometric shapes such as plane, arc, and sphere.

3) The aluminum curtain wall is not easy to be stained, which is easy to clean and maintain. The non-adhesiveness of the fluorine coating film makes it difficult to attach contaminants to the surface, and it has good cleanliness.

4) The installation and construction of aluminum curtain wall are convenient and fast. The aluminum plate is formed in the factory, and it is simply fixed without cutting at the construction site.

5) The aluminum curtain wall can be recycled and reused, which is beneficial to environmental protection. The aluminum plate can be 100% recycled, with higher recycling value.

The aluminum panel curtain wall has unique texture, rich and durable color, and the appearance shape can be diversified and can be perfectly combined with glass curtain wall material and stone curtain wall material. Its perfect appearance and excellent quality make it favored by the owners. Its lightweight is only one-fifth of marble and one-third of the glass curtain wall, which greatly reduces the load of the building structure and foundation, and maintenance costs Low, high performance-price ratio.

The above information is provided by an aluminum strip ceiling factory.


Komentarji

     
    vidno vsem

    1. Anti-deformation ability of curtain wall system

    Scientific and mechanical calculations must be made for each important part of the curtain wall system, considering the effects of wind pressure, dead weight, earthquake, temperature, etc. on the curtain wall system, and careful calibration of embedded parts, connection systems, keel systems, panels, and fasteners To ensure the safety of the curtain wall. Our company provides PVDF aluminum panel for walls.

    2. Whether the plate adopts a floating connection

    The floating connection guarantees the recovery ability after the deformation of the curtain wall, guarantees the integrity of the curtain wall, does not cause the deformation of the curtain wall due to the applied force, and avoids the occurrence of bulging or depression on the surface of the curtain wall.

    3. The fixing method of the plate

    The fixing method of the plate plays a decisive role in the flatness of the installation of the plate. The inconsistent force at each fixed point of the panel will cause the deformation of the face material and affect the exterior decoration effect. Therefore, the fixed method of the plate must be fixed at a fixed distance to ensure the flatness of the curtain wall surface.

    PVDF Aluminum Panel for Walls

    4. Are there any reinforcement measures at the edge of the composite surface material?

    Because the folded edge of the composite panel material only retains the thickness of the front plate, the thickness becomes thinner and the strength is reduced, so there must be reliable reinforcement measures for the edge removal.

    5. Whether the back of the board is reasonably set with ribs to increase the strength and rigidity of the board.

    The arrangement distance of the reinforcement ribs and the strength and rigidity of the reinforcement ribs must all meet the requirements to ensure the use function and safety of the curtain wall.

    6. Is the waterproof sealing method reasonable?

    There are many waterproof sealing methods, structural waterproofing, internal waterproofing, glue sealing, and different sealing methods that have different prices. Choose a suitable sealing method for the project to ensure the function and exterior effect of the curtain wall.

    7. Whether the selected materials meet the specifications, standards, and design requirements.

    At present, various construction materials are flooding the construction market, and the quality of materials is not the same. Choosing qualified materials is fundamental to ensure the quality of curtain walls. Strict inspection methods and methods must be adopted to ensure the quality of materials.

    The above information is provided by building outdoor decorative aluminum panel manufacturer.


    Komentarji

       
      Slika od Ivan Zhang
      od Ivan Zhang - nedelja, 28. junij 2020, 07:42
      vidno vsem

      Lean tubes currently sold in the domestic market can be divided into three types:

      Recommended product 1: PE Coated Lean Tube

      PE Coated Lean Tube


      1. Plastic composite lean tubes

      Features: Simple processing, low price, suitable for all walks of life, can reduce costs

      The exterior of the finished product is made of plastic. The colors are beige, cream white, black, green, red, blue and other colors. It can be selected and designed according to the actual needs of individuals or enterprises. Therefore, the applications of steel-plastic composite pipes are extremely broad.

      Recommended product 2: Blue Color 1.0mm Lean Pipe

      Blue Color 1.0mm Lean Pipe



      2. Stainless steel / chrome lean tubes

      The second generation uses colored stainless steel or chrome plating compared to the first generation of lean tubes. The second generation of Lean tube under the same load than the first generation of thin wall, and its high strength, wear-resistant properties make it a wide range of applications.

      Features: Stainless steel, anti-corrosion rust

      Low cost, intense market competition


      Except PE Coated Lean Tube and Blue Color 1.0mm Lean Pipe, we offer other sizes of lean tubes. Welcome contact us.



      Oznake:

      Komentarji

         
        vidno vsem


        The latest news is that there will be two Diablo projects in the near future. This may be that Diablo 4 was inspired by the publisher’s classic World of Warcraft. For fans of long-term franchise, The mobile-only Diablo The appeal is not strong, but these fans are very interested in Diablo 4 and have high expectations for Diablo 4. Both games have elements of microtransactions and multiplayer games, but players and experts hope to bring action RPG slogans to the next generation. For Diablo 4, these experts have the same attitude.

        Despite being mostly enigmatic since its 2019 announcement, anticipation is incredibly high for the title. With every entry, the Diablo series has reinvented the action RPG genre and set the bar by which other titles within the genre are judged. Even eight years later, Diablo 3 remains a tremendously popular game because of consistent updates and additions to a stellar gameplay foundation. Hopes are high Diablo 4 will mark the beginning of a brand-new generation of the RPG genre, and a replacement update from Activision Blizzard suggests how the storied developer might accomplish this daunting task.

        According to the most recent "quarterly update" from Activision Blizzard, Diablo 4 will incorporate more social multiplayer elements than previous titles within the series, including social hubs and shared-world areas where multiple players, and teams of players, can challenge difficult "world bosses."because the game currently stands, these online activities will only open up after players have conquered the most story content in each area.Diablo is a very popular game. Blizzard's classic World of Warcraft has also been sought after by many fans. Now the MMOWTS store is selling WOW Classic Gold For Sale. There are generally two ways to obtain Gold. The first is to do tasks in the game. The second way is faster, which is to buy in a well-known store, which can save the time of many players. The MMOWTS store is a very formal store, and you don’t need to worry about any transaction risks.

        Diablo 3, with local and online multiplayer options for up to four players, is excellent, but it’s not just that, the new sequel adds a lot of new content, which is largely influenced by Destiny and World of Warcraft "Inspired by other games. We can see from the language used by Activision Blizzard in the blog post that the new online infrastructure update just complements the Diablo core experience to a certain extent, but it is only a supplement and does not completely change the original content. If you are a person who likes to do tasks alone in the game, that is, you are an old-school purist, that is to say you like to Buy WOW Classic Gold play the game alone instead of collaborating with other people, then traditional solo is your best choice.

        Komentarji

           
          Slika od jack niu
          od jack niu - nedelja, 28. junij 2020, 05:12
          vidno vsem

          Magnesia-Carbon Brick

          Plant Introduction

          Sinometal refractory engineering Co., Ltd. is a modern comprehensive enterprise consisting of scientific research, manufacture and trade. Industrial products of the company are mainly magnesia refractories.

          Products of the company: The company possesses domestic advanced production line of refractories used in metallurgy industry; more than 160 sets of extensive manufacturing facilities; and more than 30 sets of checkout equipment. The company's annual output of magnesia carbon brick, alumina magnesia carbon brick and aluminium carbide brick and so on is 70,000 tons

          Quality advantages: All products of the company are in accordance with national standard as well as the enterprise's standard, and has got ISO9001 Quality Management System Certification and ISO14001 Environment Management System Certification.

          Scientific and technical advantages: The company invested a large sum of money to built the building of engineering technology center which covers an area of 5,000 square meters in 2012.The company's capability of scientific research and development is abundant.

           

          high refractoriness Brick brief introduction

          Magnesite Carbon brick is a kind of basic refractory which is made from magnesite, graphite as raw material, resin as binder, with high pressure moulding and low temperature treatment.

          As one kind of compound refractories, it make magnesite good slag erosion risistance and graphite high thermal conductivity and low dilatability mixed together. Thus BOF Brick has features of high refractoriness, good thermal shock resistance,erosion resistance, and has good performance in I&S industry, including BOF, EAF, LF.

          basic refractory brick series have the advantages of good performance, long life and low cost. And long supply experience can make sure that we can give our customer total solutions

          Alumina Magnesia Carbon brick has same production process, the main raw materials are fused alumina or bauxite, so it has better strength and refractoriness under load, but the slag resistance is not as good as magnesia Carbon bricks.

           


          Komentarji

             
            Slika od jack niu
            od jack niu - nedelja, 28. junij 2020, 05:12
            vidno vsem

            Copper Mould Tube & Plate

            We specially in supplying Copper Mould Tube, Crystallizing equipment of continuous casters, Mould cooling jacket, Repair of Metallurgical Copper Mould Tube, etc.

            Equipments & Spare parts for Continuous Casting Machine.

            1. Copper mould tube( square, rectangle and round )

            2. Crystallizing equipment of continuous casters

            3. Mould cooling jacket.

            4. repair of copper tube moulds

             

            COPPER MOULD ALLOYS

            The copper alloys chosen for the moulds must maintain their physical properties at the operating temperatures of the continuous casting process.

            The temperature gradation from the inner wall of the mould to the outside face of the mould can cause serious distortion problems, and Metallurgical Copper Mould Tube is imperative that the correct alloy is chosen for the various operating conditions.

             

            Square Copper mould tube STANDARD MATERIALS

            Phosphorus de-oxidised copper

            This alloy has been proven to be excellent for the manufacture of moulds in the continuous casting of billets. The main composition of this alloy are Cu +Ag 99.90min, P0.0015 / 0.040.

            Copper -Silver alloy

            The addition of a small amount of silver, whilst not increasing the melting point of copper, does increase the recrystallisation temperature by almost 100℃, and also helps to give better thermal conductivity at the operating temperatures.

            This alloy is normally used in moulds for the continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012.

            Copper Mould Tube supplier

            The continuous casting of molten steel into billets, blooms and slab products, has been highly refined over the years into an extremely sophisticated system. The continuous casting process is expected to produce metallurgically sound products at the lower possible cost, and this is being achieved in many steelworks throughout the world.

            Copper moulds have played an important role in the development of the continuous casting process. Their funcition is to receive the molten steel and to allow rapid heat transfer from the steel to the cooling water to enable quick solidification.

            The mould must exhibit excellent thermal conductivity, be resistant for thermal erosion ,and be resistant to distortion from thermal stress. So far only copper and a few copper alloys meet the above conditions, both economically and technically.

            Mould cooling jacket supplier SOLIDIFICATION

            The rate of solidification in the continuous casting process dictates the speed of production. The molten steel, which is in contact with the inner faces of the copper mould, starts to sllidify as rapidly as the heat is extracted, forming a shell. The shell increases in thickness as more heat is extracted, and eventually total solidfication is achieved. the process is similar to the solidification of ingots in ingot moulds. In continuous casting, the whole process is speeded up, with the aim to produce and homogeneous shell growth. Consequently, the mould is an important part of the continuous casting process, and the manufactured quality of the mould plays and important role in their length of life.

            INNER SURFACE COATINGS

            Over the years, Metallurgists and Engineers have been working together to develop better continuous casting moulds. The steel companies require a more economical mould which will give a longer service life. Surface coating of the inner walls of the mould has given the best results to date. Coatings available are Chromium and Nickel plating. Also, a combination of the two give good results on slab casting.

            SPECIFICATIONS OF COPPER MOULD

            Square Copper mould tube

            Square 60 x 60 - 350 x 350 (mm)

            Rectangle 120 x 160 - 180 x 300 (mm)

            Round Copper Mould tube

            Diameter 100-400 (mm)

            Size(mm): 90x90, 100x100, 110x110, 115x115, 120x120

            130x130, 135x135, 140x140, 143x143, 150x150

            155x155, 160x160, 165x165, 175x175, 180x180

            200x200, 220x220, 100x170, 100x173, 130x240

            150x200, 150x210, 150x220, 160x200, 160x220

            150x225, 160x235, 165x225, 175x225, 180x220

            200x240, 240x240, 235x235

            Radius(mm): 4000, 5000, 5250, 6000, 7000, 7500, 8000, 9000, 10250, 10300, 11000, 12000

            Length(mm): 700, 750, 780, 790, 800, 810, 812, 850, 900, 1000


            Komentarji

               
              Slika od jack niu
              od jack niu - nedelja, 28. junij 2020, 05:12
              vidno vsem

              Graphite electrodes including RP Graphite Electrodes, RPI, HP, SHP and UHP Graphite Electrodes are widely used in Electric Arc Furnace and Ladle furnace for making alloy steel or other metals and nonferrous metal.

              Our main exporting size of Graphite Electrodes Solutions are:

              (Dia. 75-Dia. 700mm)

              Our Ladle furnace Graphite Electrodes has the following feature:

              1. Lower electric resistivity, good electric and heat conductivity;

              2. High mechanical strength under high temperature;

              3. High resistance to thermal shock and mechanical vibration;

              4. Lower ash content;

              5. According to the customer's feedback information, our electrodes used in EAF/LF with the pretty lower consumption per ton steel.

              We main supply electric arc furnace graphite electrodes, direct current furnaces electrodes.

              look forward to working with you for a long time!

              Item

              Unit

              Nominal Diameter

              UHP

              HP

              RP

              Φ300-400

              ≥Φ450

              Φ250-400

              ≥Φ450

              Φ250-400

              Φ450-600

               

               

               

               

               

               

              Electric Resistivity

              electrode

              μΩ·m

              ≤5.0

              ≤5.5

              ≤6.0

              ≤6.5

              ≤8.5

              ≤9.0

              Nipple

              ≤4.0

              ≤4.5

              ≤5.5

              Transverse Strength

              electrode

              MPa

              ≥15.0

              ≥10.5

              ≥8.0

              ≥7.0

              Nipple

              ≥24.0

              ≥20.0

              ≥16.0

              Young's Modulus 

              electrode

              GPa

              ≤14.0

              ≤12.0

              ≤9.3

              Nipple

              ≤18.0

              ≤16.0

              ≤14.0

              Bulk Density

              electrode

              g/cm3

              ≥1.68

              ≥1.65

              ≥1.54

              Nipple

              ≥1.76

              ≥1.74

              ≥1.70

              Coefficient of thermal expansion

              electrode

              10-6/ºC

              ≤1.5

              ≤2.0

              ≤2.5

              Nipple

              ≤1.2

              ≤1.6

              ≤2.0

              Ash

              %

              ≤0.2

              ≤0.2

              ≤0.2

               


              Komentarji

                 
                vidno vsem

                The development process of many games has hindered because the epidemic situation is too severe this year. POE 2, which scheduled to release at the end of this year, now looks unlikely to hold as planned. It is understandable, although it disappoint players. The release of Harvest League dilutes loneliness of players. They used POE Currency originally reserved for POE 2 in Harvest League to get a better experience.

                Players can already see posts written by developers on the official POE forum. The content of the post is roughly that they will not release the Beta version of POE 2 this year. The focus of the developer’s work is now Harvest League, so it will inevitably lead to the delayed release of POE 2. The release time of the remaining two expansions this year may be late because the duration of Harvest League will be as long as 14 weeks.

                Another new expansion that players will see in September will be excellent. The unpleasant news is that the development of the new league that appears in December may be slow. It was Christmas time at that time, and many staff members needed to go home to accompany their families. Even if there is a problem with the game, a professional technician will fix it immediately. GGG will speed up work efficiency to push more interesting new content for players on time to keep players’ enthusiasm for POE.

                Mac users may also experience the fun of Path Of Exile this year. There will be many novice players pouring into the POE game world to experience various novel functions and mechanisms. For newcomers who understand nothing, Buy POE Currency is their most correct choice. After having Path of Exile Currency and POE Items, things are much easier. Stay tuned!


                Komentarji

                   
                  vidno vsem

                  3D rendering furniture design system self-defined house design system

                  Hand drawing of special shapes  

                  Haixun furniture industry software is one that has linked designers and factories together. It is the most functional, most optimal and most efficient furniture industry software currently available in the market. Its concise style, elegant and beautiful layout and humanized operations have greatly improved the design and production efficiency of enterprises and created greater benefits for customers. 

                  Reversed modeling  

                  It supports reversed modeling, one-key saving and direct call. It can save a cabinet made of plates as a module into the database through only one key and have the module built from nothing and changed from complex to simple in a real sense. During next-time call, designers can modify its size, plate thickness and scaling, etc. to quickly complete the drawing.

                  Six sides drawing  

                  It has created the real three-dimensional six-side drawing method to realize multiple-sided drawing. For L-shaped cloakrooms and U-shaped cabinets, it can choose different views and add plates, drawers and components, etc. randomly, and can convert all different views into front view, which has solved a big problem of the industry and made whole house customization easy.

                  Real-time update of dual-core database   furniture software with database update

                  It uses cloud and local dual-core databases, which keep expanding continuously, with the local database storing data continuously while the cloud database keeping updating in real time. It can enrich your database and make the designers able to find all cabinets and complete all processes.

                  CAD import and export     furniture software with CAD export

                  The system can import CAD components which can get adaptive to the space automatically. The imported components can be saved as modules and uploaded to the local database for size change and automatic scaling, etc. during the next-time call. The system can also realize one-key import of CAD special-shaped plates as well as import and export of CAD plans and stereograms, etc.

                  Size association   

                  The system can call the cabinet body, shift the plates and scale the plates in the space automatically. Once the drawing is completed, this system allows you to modify the size of the space at will. Through this system, your design no longer needs frequent deletion, modification or calculation and becomes flexible and changeable.

                  One-key inclined cutting   

                  The system supports one-key inclined cutting for standard cabinets and one-time formation of inclined cutting angle and stair cabinet. The system can generate the cabinet body and hole positions and the oblique angles, and calculate the inclined plates automatically.

                  Combined cutting angles   china furniture Combined cutting angles software

                  The system can conduct angle cutting for regular cabinet bodies automatically and directly, and supports free choice of the angle cutting type and angle cutting depth, free combination of horizontal and vertical cutting angles and free choice of multiple angle cutting processes. It has stronger manipulability and suits all sorts of house types. It supports freely combined cutting angles of up and down angle cutting and right and let angle cutting, and can liberate you from the trouble of drawing corner cabinets.

                  One-key formation of wine grids

                  The system can generate wine grids with only one key. It enables you to produce four styles of wine grids, namely horizontal, vertical, half-angle and full-angle, by clicking only one key after selecting certain area It allows you to adjust the sealing edge, opening amount and size of the wine grids freely, and calculate the net space of the wine grids in real time.

                  Parameter adjustment

                  The system can add multiple kinds of accessories, including sliding rail, handle, hinge and clothes rail, etc., with one key. It can generate hole positions for the accessories automatically and support free adjustment according to needs.

                  Powerful rendering  3D rendering furniture design system supplier

                  The system supports powerful 3D rendering, self-defined house type, 720 degree panoramic view, multi-directional indoor wandering and additional lighting effects, which can restore the furniture colors and improve the sales force of the terminal stores.


                  Komentarji

                     
                    vidno vsem

                    Haixun Furniture Design System furniture automatic cutting angles software

                    Hand drawing of special shapes  

                    Haixun furniture industry software is one that has linked designers and factories together. It is the most functional, most optimal and most efficient furniture industry software currently available in the market. Its concise style, elegant and beautiful layout and humanized operations have greatly improved the design and production efficiency of enterprises and created greater benefits for customers.

                    Reversed modeling  Reversed modeling Furniture Design System

                    It supports reversed modeling, one-key saving and direct call. It can save a cabinet made of plates as a module into the database through only one key and have the module built from nothing and changed from complex to simple in a real sense. During next-time call, designers can modify its size, plate thickness and scaling, etc. to quickly complete the drawing.

                    Six sides drawing  

                    It has created the real three-dimensional six-side drawing method to realize multiple-sided drawing. For L-shaped cloakrooms and U-shaped cabinets, it can choose different views and add plates, drawers and components, etc. randomly, and can convert all different views into front view, which has solved a big problem of the industry and made whole house customization easy.

                    Real-time update of dual-core database   

                    It uses cloud and local dual-core databases, which keep expanding continuously, with the local database storing data continuously while the cloud database keeping updating in real time. It can enrich your database and make the designers able to find all cabinets and complete all processes.

                    CAD import and export     

                    The system can import CAD components which can get adaptive to the space automatically. The imported components can be saved as modules and uploaded to the local database for size change and automatic scaling, etc. during the next-time call. The system can also realize one-key import of CAD special-shaped plates as well as import and export of CAD plans and stereograms, etc.

                    Size association   

                    The system can call the cabinet body, shift the plates and scale the plates in the space automatically. Once the drawing is completed, this system allows you to modify the size of the space at will. Through this system, your design no longer needs frequent deletion, modification or calculation and becomes flexible and changeable.

                    One-key inclined cutting   furniture Combined cutting angles software

                    The system supports one-key inclined cutting for standard cabinets and one-time formation of inclined cutting angle and stair cabinet. The system can generate the cabinet body and hole positions and the oblique angles, and calculate the inclined plates automatically.

                    Combined cutting angles  furniture automatic cutting angles software

                    The system can conduct angle cutting for regular cabinet bodies automatically and directly, and supports free choice of the angle cutting type and angle cutting depth, free combination of horizontal and vertical cutting angles and free choice of multiple angle cutting processes. It has stronger manipulability and suits all sorts of house types. It supports freely combined cutting angles of up and down angle cutting and right and let angle cutting, and can liberate you from the trouble of drawing corner cabinets.

                    One-key formation of wine grids

                    The system can generate wine grids with only one key. It enables you to produce four styles of wine grids, namely horizontal, vertical, half-angle and full-angle, by clicking only one key after selecting certain area It allows you to adjust the sealing edge, opening amount and size of the wine grids freely, and calculate the net space of the wine grids in real time.

                    Parameter adjustment

                    The system can add multiple kinds of accessories, including sliding rail, handle, hinge and clothes rail, etc., with one key. It can generate hole positions for the accessories automatically and support free adjustment according to needs.

                    Powerful rendering

                    The system supports powerful 3D rendering, self-defined house type, 720 degree panoramic view, multi-directional indoor wandering and additional lighting effects, which can restore the furniture colors and improve the sales force of the terminal stores.

                    As a leader in application software technologies of the furniture industry, Haixun Software has an excellent r&d design and service team in the industry. Haixun Furniture Design System, Haixun Furniture Production System, Haixun Cloud Rendering System, Haixun Door Plank Carving System, Haixun Packaging and Delivery System.


                    Komentarji