Blog spletnega mesta

Slika od Raisha Wang
od Raisha Wang - sreda, 27. maj 2020, 03:12
vidno vsem


liquid nitrogen crusher

1.moringa leaf grinder GENERAL INTRODUCTION

This machinery is mainly applicable for the pharmacy, the chemical industry, metallurgy industry, and the foodstuff industry, etc. It specially grinds the hard and solid materials including the plastic, copper wires, discarded type and so on. It also can be used as the corollary equipment for fine grinding process.

It is an ideal equipment for rough crushing with high efficiency and overcomes some abuses of the vertical machine, such as the locked moving cutter, the left material in the shell, the low efficiency, etc.


The coarse crusher for the horizontal crushing structure, the material from the hopper into the crushing chamber, the use of rotating knife and fixed knife impact, shear and get crushed by the rotation of the centrifugal force, the material automatically flow to the exit. Powdered icing sugar grinding machine is designed according to the "GMP" standard. The whole machine is made of stainless steel. The structure is simple, the cleaning is convenient and the noise is low. It is the most ideal equipment in the roughing machine.

3.STRUCTURAL PRINCIPLE OF Hammer Pulse Dust Collector grinding machine

The machine adopts horizontal structure, the spindle is supported by two rolling bearing, and installed with two movable frame, each movable frame total installed with 3 moving knives. bearing the lateral have transmission in cabinet are installed in the fixed knife 4. Therefore the dynamic knife with 6 to 4 the fixed knife material shear strength, to smash purposes. In bearing the lateral have drive pulley, there are 4 fixed knives in the cabinet, therefore the materials is effectively grinding by the 6 moving knife and 4 fixed knife , to achieve crushing purposes.


    vidno vsem

    At present, there are more and more patients with joint replacement (total knee surface replacement, unicondylar replacement, hinged knee replacement, total hip replacement), and the survival time of joint replacement includes patient factors, doctor factors and prosthetic factors. Joint prosthesis manufacturer shares with you.

    In 2019, Boyer Bertrand and other scholars published a report in Orthopaedics & Traumatology: Surgery & Research. They analyzed 63619 joint replacements, including 30733 total hip replacements, 28583 total knee surface replacements, 3754 unicondylar replacements, and 649 hinge knee replacements, with an average follow-up of 5 years. The patient factors included age, gender, body mass index (BMI), diabetes, and body weight. What are their meaningful discoveries?

    1. Factors affecting the survival time of total hip replacement prosthesis (with revision as the end point)

    (1) Factors affecting overall renovation: age, gender, diabetes, weight

    (2) Factors affecting the revision of infectious loosening: age, diabetes,

    (3) Factors affecting the revision of aseptic loosening: age, gender, diabetes, weight

    Joint Prosthesis

    2. Factors affecting the survival time of total knee surface replacement prosthesis (with revision as the end point)

    (1) Factors affecting overall renovation: age

    (2) Factors affecting the revision of infectious loosening: age and gender, but attention should be paid to the potential impact of diabetes (P = 0.0682)

    (3) Factors affecting the repair of aseptic looseness: age

    3. Factors affecting the survival time of knee unicondylar replacement prosthesis (with revision as the end point)

    (1) Factors affecting overall renovation: gender

    (2) Factors affecting infectious loosening leading to revision: age, gender

    (3) Factors affecting the repair of aseptic looseness: age, gender

    4. Factors affecting the survival time of hinged knee replacement prosthesis (with revision as the end point)

    (1) Factors affecting the overall renovation: none have any impact, but attention should be paid to the potential impact of gender (P = 0.0593)

    (2) Factors affecting the repair of aseptic looseness: age, gender

    To sum up

    Gender, age and diabetes affect the survival time of lower limb joint replacement prosthesis, while BMI has no effect, but bodyweight affects the survival time of total hip replacement prosthesis. Therefore, we should explain to the patients before the operation; in addition, when we do the survival study of joint replacement prosthesis, we need to describe the gender, age, and diabetes status in detail to avoid the incomparability of the patient base.


      vidno vsem

      Whether the limbs are the same length after surgery is a question that people pay more attention to after hip replacement.

      Everyone already has a more perceptual understanding of the joint prosthesis from various channels, but the word "modular" should not be known by many friends.

      The development of prosthesis assembly is mainly reflected in the femoral stem. In the 1970s and 1980s, the one-piece femoral stem was mostly used, and there was no link to disassemble, which meant that the angle and length could not be fine-tuned.

      Later, the femoral stalk with head and neck connection emerged, which is also the most widely used design today. Some people call it a single assembly design. Its main advantage is to adjust the length of the limbs by controlling the depth at which the femoral stalk neck is inserted into the ball head. So sometimes it looks like the neck of the prosthesis on both sides is not the same length.

      Joint Prosthesis

      In some cases where the deformity is heavy or there is abnormal development, this single-assembly design cannot reconstruct the hip joint well.

      Therefore, the dual-assembly design came into being. In addition to being adjustable at the head-neck junction, it can also be adjusted at the neck-body junction, but studies have shown that the clinical effect of this design is not significantly better than the single-assembly design, and The ability to deal with complex deformities is limited, so it is not widely used.

      At present, we are accustomed to referring to the femoral stem with only the head and neck as an integrated femoral stem.

      The special prosthesis mentioned in the explanation of the patient's condition is the current assembly prosthesis. Its assembly structure enriches the adjustment of the prosthesis in terms of limb length, angle and muscle tension. Applied to hip joint diseases with complex deformity, abnormal bone torsion, and high dislocation of the femoral head.

      On the side of the acetabular cup, the principle of placement is to make as much contact with the bone as possible. In most cases, it will be placed in the same nest as the femoral head.

      When the socket is relatively shallow and cannot cover the acetabular cup, especially the dysplastic acetabulum, we will choose to move the acetabular cup up. So the two sides are asymmetric at first glance, giving the impression that the limbs are not equal in length.

      But is this really the case? Obviously not, the prosthesis's compatibility is to compensate each other and cancel each other out. It's shorter here, and it will be done if there is some growth there.

      The above information is provided by joint prosthesis manufacturer.


        vidno vsem

        Elderly people are at high risk of falling and may cause hip fractures. They fell because they lost their coordination. Hip joint system prosthesis supplier shares with you.

        There are many risk factors for hip fractures, including:

        Osteoporosis: This disease causes the bones to weaken, making them more likely to fracture. In the United States, an estimated 10 million people already have osteoporosis, 80% of whom are women. In this population, hip fractures may occur during simple weight-bearing activities.

        Double Tapered Stem Prosthesis

        Gender: As estrogen levels decrease after menopause begins, women are more likely to lose bone density than men.

        Heredity: People with thin bones; Caucasians and Asians have an increased risk of osteoporosis.

        Nutrition: Malnutrition in childhood increases the risk of hip fracture. Eating disorders such as anorexia nervosa and bulimia can damage bones.

        Smoking and drinking: Smoking and drinking too much can cause bone loss.

        Drug therapy: Taking four or more drugs at a time or taking any psychoactive drugs is a risk factor for falls.

        Home environment: Throwing carpets and wires at random is a danger of tripping, as is the lack of stair railings and handrails, as well as unstable furniture and poor lighting.

        Medical diseases: The following diseases may increase the risk of hip fracture through bone loss or an increased risk of falls: endocrine disorders, such as type 1 diabetes; gastrointestinal diseases; rheumatoid diseases; prolonged bed rest or mobility impairment; neurological diseases, For example, Parkinson's disease or multiple sclerosis; dementia; and depression.

        Our company provides double tapered stem prosthesis.


          Slika od sbo bet
          od sbo bet - sreda, 27. maj 2020, 02:22
          vidno vsem

          • IDN Live  Data HK  memiliki berbagai permainan

          1 putaran Sicbo

          Anda dapat menggunakan 3 file baru di awal tahun server ketiga, tetapi Anda dapat menggunakan memori pengguna untuk mengunduh 3 halaman, dan Anda dapat menggunakan manual selama 3 tahun untuk mengunduhnya. 

          jadi initnya permaianan ini hanya menunggu hasil dari pengocokan dadu ini, angka yang keluar berarti angka hasil.

          2. Roda roulette 

          Permainan Roulette Pool adalah permainan menebak angka dari angka 0 hibgga angka 36. Dengan berharap bola juga akan berhenti ke tempat taruhan yang telah dipasang.

           Bundaran lanei Casino pertama. Permainan Roulette ini mejadi permainan yang banyak digemari sebab permainan yang mudah dan juga kekalahan dan kemenganya memiliki nilai yang seimbang, sekiranya kita bermainya dengan keseimbangan akan lebih mudah didapat kemengan.

          3.Dice 6 Pool

          Dadu 6 Pool yaitu game dadu online yang bisa sangat menarik sekali lebih menarik dibandingkan dengan game dadu yang lain. Langkah- langkah bermain Dice 6 Pool juga bisa di bilang sangat mudah sekali karena kitaa cukup menebak angka yang akan keluar dari dadu yang di mainkan oleh dealler.

          Anda dapat mengunduh game di komputer Anda, mengunduh versi Android, dan menggunakan aplikasi IDNPlay untuk mengunduh pemasangan. Anda dapat mengunduh melalui ios.

          4.Oglok Pool

          Permainan oglok pool adalah permainan menebak keluaran dari tiga buah dadu di mana pada setiap-setiap komponent dadu itu ada gambar udang, ayam, kendi, koin, kepiting, serta ikan.

           ke-3 dadu ini di masuk dalam satu wadah lalu di kocok hingga dadu dadu itu bertukar gambar jika kita berhasil menebak gambar yang di tunjukkan oleh dadu dadu itu saat dibuka jadi kita bisa mendapatkan kemenangan.

          Permainan ini sangat mudah sekali karena kita hanya menaruhkan Keberuntungan di permainan ini agar kita tidak perlu berpikir terlalu berat untuk permainan yang satu ini.

          5.Billyard Pool

          IDNLive Billiard Pool adalah cara yang sangat populer untuk bermain bilyar, dan ada sistem media yang memungkinkan Anda bermain roulette online secara online. Satu-satunya cara untuk membebaskan mereka adalah tetap. Karna Anda hanya perlu menebak angka bilyar mana yang paling dekat dengan komponent meja billard dari Pemukul.  

          Sesudah itu Anda dapat melakukan taruhan dengan koleksi jenis yang disediakan seperti taruhan besar-kecil, terka angka dan tebak baris yang dapat Anda mainkan melalui satu akun Anda.

          Permainan ini juga melatih keberlanjutan dan tidak perlu banyak membahas takti atau cara bermain yang menguras otak.

          6. Pool Dadu Poker

          Permainan Poker Dice Pool adalah permainan kasino tipe 2 judi pilihan adalah permainan Poker dan Dadu, hingga permainan ini dibuat populer serta dibeli oleh masyarakat luas di Indonesia.

           Untuk pertama kalinya, Anda akan dapat memainkan game ini, Anda tidak akan bisa bermain poker, Anda tidak akan bisa bermain poker. Dadu yang dimakan terbagi dalam 5 buah dan memiliki 3 buah warna merah dan 2 warna hitam.

          Jika Anda tidak ingin menggunakan ID Karta Anda Langsung, jika Anda tidak ingin pergi ke IDN Live, maka Anda akan bisa mendapatkan banyak bantuan dari IDN Live Anda.

           Semoga yang saya jelaskan barusan bisa menambah ilmu kita tentang permainan yang ada di IDN Live, saya ucapkan terima kasih.

          [ Spremenjeno: sreda, 27. maj 2020, 02:23 ]


            Slika od Jeremy Clay
            od Jeremy Clay - torek, 26. maj 2020, 13:37
            vidno vsem

            League of Legends has several difficult elements when it comes to power up the champions and working on those strategies that can beat opponents. But, it is easy to understand the main goal to beat the opposition's Nexus. Many League of Legends Gambling matches contains a single round in which the winner's team only needs to destroy the opponent's Nexus once.

            [ Spremenjeno: ponedeljek, 22. junij 2020, 14:20 ]


              Slika od Wendy Li
              od Wendy Li - torek, 26. maj 2020, 10:55
              vidno vsem

              Anti-static aluminum foil bag

              Moisture-Proof Bag

              PE Anti-Static Aluminum Foil Bag


              Anti-static aluminum foil bag is also known as anti-static    moisture-proof shielding aluminum foil vacuum bag, aluminum foil bag, vacuum bag, moisture-proof bag and so on.

              Product appearance: silver white, matt and bright.

              Features: Anti-static, anti-electromagnetic interference, moisture-proof three functions, Faraday cage structure, shielding barrier up to 60db, strong electrostatic protection, inner layer of pure metal aluminum, resistivity less than 0.1Ω, four layers Strong structural composite ability, firm sealing, good waterproof, oxygen barrier, light protection and puncture resistance.

              Material structure of Leader Tape: antistatic layer (PET) / aluminum foil layer (shield moisture barrier) / PET / antistatic layer (PP or PE)

              Product performance: electrical and physical properties meet international standards such as ASTTMD257, EIA541, MIL-B-81705

              Conventional thickness: 100μm, 120μm, 140μm

              Surface resistance: 10-11 Ω of 10

              Bag style: flat pocket, self-sealing (tight bag / zipper bag), envelope type, envelope self-adhesive, one-piece, three-dimensional, etc., the bag body pattern can be printed according to customer requirements.

              Product use of Smart Card Chip Guide Tape: Suitable for electronic product packaging with moisture-proof requirements: various PC boards, IC integrated circuits, optical drives, hard disks, vacuum packaging of chemical raw materials and biological intermediates, etc.


                Slika od Vicky Wu
                od Vicky Wu - torek, 26. maj 2020, 10:53
                vidno vsem

                Driving on the road all year round, especially at night, I often encounter the dim or "one-eyed" lights of some cars, but also our own cars suddenly dim or do not light. what's going on? Is it the quality of the bulb or something else?

                Automobile LED headlights supplier to share with you: In fact, as a car lamp, it also has a "life", or a usage decay period of working conditions. The brightness will gradually decrease during long-term use, and eventually become dim or even not bright. These are the times when the lights need to be replaced.

                So how long can our car lights last, and how long do they last? Let's talk about different automotive LEDs.

                The most common are halogen headlights, which are also the longest in service in automotive history. The basic luminous principle of the halogen lamp is the same as that of the incandescent lamp. Both of them conduct sufficient current to the tungsten wire to heat the filament to the incandescent state and emit light.

                The difference is that the small quartz glass case of halogen lamps is filled with halogen element iodine or bromine gas. The presence of these halogen elements can reduce the loss of tungsten filaments at high temperatures, extend the life of the filaments, and make the filaments work higher. Temperature, so as to obtain higher brightness, color temperature and luminous efficiency. At present, the headlights on most economical family cars are halogen lamps.

                Longer life is due to the addition of iodine and bromine into the bulb. The tungsten wire will sublimate into a gas when it glows and is heated. The sublimed tungsten wire will react with the two halogen gases, iodobromide, and eventually become tungsten wire. In this way, the tungsten wire will not easily burn out. . Therefore, it is not a problem for our current halogen headlamps to accumulate 300 hours.

                Therefore, when changing the halogen headlights, it is required to carry out construction with gloves, because the grease on the fingers left on the glass surface of the bulb will cause the temperature to vary and easily burst.

                The advantage of halogen lamps is that the production technology is mature and the cost is relatively low. Therefore, there are still many models in assembly today, but the disadvantage is that the brightness is not enough. So many partners are willing to upgrade halogen lamps in the later stage. Such as upgrading xenon lamps

                The principle of the xenon lamp is to fill the crystal quartz glass tube with xenon gas (filled with iodide, and instantly boost the 12 volts DC voltage to 23,000 volts through a supercharger, and the high voltage amplitude excites the xenon electrons in the quartz tube to be free. A light source is generated between the two electrodes, and a white super-strong arc light generated by xenon gas.

                Automotive Led Headlights

                Automotive Led Headlights

                The current required for HID to work is only 3.5A, the brightness is three times that of traditional halogen bulbs, and the service life is 10 times longer than that of traditional halogen bulbs. It also reaches a power of 55w, and the power consumption of xenon lamps is half that of halogen lamps. Use can reach 3000 hours.

                Our original car xenon lamp can reach the above normal service life, but it may not necessarily be upgraded and modified later. This depends on the quality of the lamp you bought, the technical requirements for installation and construction, and the reliable store can be upgraded more comprehensively. The choice and installation of ballasts will also be relatively strict.

                Because the stabilizer is added in the later upgrade, the stabilizer will be an important factor that affects the service life. Ordinary upgrade and modification can not achieve the original level. Life will be longer than halogen lamps. So we must pay attention to this when choosing to upgrade, we must consider the choice of cost performance and installation technology.

                Finally, we talk about automotive LED headlights. There is no doubt that the use of LEDs will become the trend of future cars. This is due to the high brightness of LEDED lamps, low power consumption, and almost no burnout. However, the price is more expensive, and less used for family cars. It is more used in high-end cars and luxury cars. Since it must be expensive, its service life can reach 60,000 to 100,000 hours. It is likely that our cars are scrapped. The lights won't break.

                There are so many advantages of LED lights, but you must pay attention to changing LED lights. The heat dissipation is a problem when applied to car lights. If the heat dissipation is not good, the light decay will be very serious. Friends who want to change must design a good cooling solution.



                  vidno vsem

                  Being illuminated by high beams, I believe many drivers will encounter them every night. Turning on high beams when meeting or following in the city will seriously affect the sight of other drivers. Therefore, in urban areas, as far as possible, open the far light as little as possible, and the correct use of far and near light exchange is an important guarantee for civilized driving.

                  And sometimes these vehicles that seem to turn on the high beam are actually turned on with low beam, but its high beam is relatively high. Whether the headlights are too high or too low in daily driving is not conducive to driving safety. Let's take a look at how to adjust the height of the automobile low beam yourself.

                  Led Auto Headlights

                  Led Auto Headlights

                  1.The headlights are misaligned after a slight impact

                  2. Replacement of headlight parts causes misalignment

                  3.The headlight height is wrong / displaced due to other reasons

                  When we are driving normally, observe the height of the low beam headlights. If the tangent line reaches the position above the rearview mirror of the car in front, then the height of the low beam headlights is definitely wrong. In addition, if the dipped beam is turned on to illuminate the wall, the tangent positions of the left and right dipped beams do not coincide, then the position is wrong. The position of the standard dipped headlights is that the left and right headlights tangent coincide. The tangent of a single dipped headlight is left low and right high, instead of the so-called "left low right high" of the left and right headlights.

                  Of course, many people will say why not directly go to the 4S shop for maintenance adjustment. It is undeniable that this is the simplest and most effective. However, some 4S stores are relatively remote, and it is not difficult to adjust the height of the low beam. DIY is not a good idea.

                  It should be noted that the adjustment of the width of the light is difficult, and it is not recommended to adjust it by yourself. If the width of the light is really inappropriate due to collision or other reasons, it is recommended to go to the 4S shop for timely adjustment.

                  Preparation tools: adhesive tape, Phillips screwdriver or hexagon socket for marking purposes, flashlight, tape measure

                  Location: Underground parking white wall

                  First, find a clean wall, park the car about 3 meters from the wall, and measure the distance from the center of the vehicle's low-beam light to the ground. Based on the height of the low beam headlight that we measured above the ground, we used tape to set a baseline on the wall in front of the car. (The reason why the tape is set is because the tape can be easily removed after use to avoid embossing the wall.) The standard for adjustment is that the tangent is slightly lower than the mark, and the method of the left and right headlights is similar.

                  In addition, if your car has a headlight height adjustment knob, you should first adjust the headlight height adjustment knob to the "0" position before adjusting the headlight.

                  Find the adjustment bolts behind the headlight assembly. The adjustment bolts around many models are toothed. It is easy to judge that the parts that need to be adjusted and the tools used are different for different models, and need to be determined according to the specific model.

                  It should be noted that some car lights are integrated with near and high beams, so there are generally two adjustment bolts for height adjustment and width and width; while independent near and high beam headlights can adjust the height of the low and high beams, respectively. It can also adjust the width and width, so there may be 3-4 adjustment bolts.

                  When adjusting, twist the bolt with one hand, observe the change of the tangent position on the wall, and adjust according to the height of the mark. The tangent height of the low beam is lower than the reference line as the standard.

                  When adjusting led auto headlights, do not sit on the car or sit alone in the car. If the trunk is pulled with a lot of weight or the car is fully loaded, the height of the vehicle will drop a lot. There is no small effect.

                  We are China led auto headlights manufacturer, if you have any demand for our products, please feel free to contact us.


                    vidno vsem

                    Automobile atmosphere lamps are indispensable as night lighting lamps. With the development of LED, more and more car manufacturers have adopted LED headlights as the first choice for car lights. LED car light refers to the use of LED technology for both interior and exterior light sources for external and internal lighting. External lighting equipment involves thermal limits and EMC issues, as well as many complex standards for off-load testing. LED car lights can be widely used to create the environment inside the car.

                    Structure of Mi2 automobile LED headlights:

                    A single LED is composed of gold wire, LED chip, reflection ring, cathode wire, plastic wire, and anode wire.

                    The core of the light-emitting diode is a wafer composed of a p-type semiconductor and an n-type semiconductor. There is a transition layer between the p-type semiconductor and the n-type semiconductor, which is called a pn junction.

                    In the PN junction of some semiconductor materials, the injected minority carriers and the majority carriers will release excess energy in the form of light, thereby directly converting electrical energy into light energy. A reverse voltage is applied to the pn junction, and minority carriers are difficult to inject, so it does not emit light. This type of diode made using the injection-type light-emitting principle is called a light-emitting diode, and is commonly called an LED.

                    The lighting process of LED includes three parts:

                    Carrier injection, composite radiation, and light energy transmission under forward bias.


                    Automotive Led Work Lights

                    Tiny semiconductor wafers are encapsulated in a clean epoxy resin. When the electrons pass through the wafer, the negatively charged electrons move to and recombine with the positively charged hole area. Photons are generated while the electrons and holes disappear.

                    The greater the energy (band gap) between the electron and the hole, the higher the energy of the photon produced. The energy of the photon in turn corresponds to the color of the light. Within the spectrum of visible light, blue light and purple light carry the most energy, and orange light and red light carry the least energy. Because different materials have different band gaps, they can emit different colors of light.

                    When it is in the forward working state (that is, the forward voltage is applied to both ends), when the current flows from the LED anode to the cathode, the semiconductor crystal emits different colors of light from ultraviolet to infrared. The intensity of the light is related to the current. For example, an LED is like a burger. The material that can emit light is the "meat pie" in the sandwich, and the upper and lower electrodes are bread with meat. And through the research on the light-emitting materials, people have gradually developed a variety of light color, light efficiency LED components are getting higher and higher, but no matter how changed, the overall light-emitting principle and structure of LED has not changed much.

                    Advantages of automotive LED work lights:

                    (1) Energy saving: The light-emitting diode directly converts electrical energy into light energy. The power consumption is only 1/10 of that of traditional lamps, which can better reduce fuel consumption and protect automobile circuits from being burned by excessive load current.

                    (2) Environmental protection: There is no ultraviolet and infrared in the spectrum, there is no heat generation, no radiation, little glare, and the waste is recyclable, contains no mercury elements, no pollution, and can be safely touched. It is a typical green lighting source.

                    (3) Long life: there are no loose parts in the lamp body, and there are no shortcomings such as easy burning, thermal deposition, and light decay of the filament. Under the appropriate current and voltage, the service life can reach 80 ~ 100,000 hours, which is longer than the life of traditional light sources. More than 10 times longer. (There is a replacement, the characteristics of lifetime use)

                    (4) High brightness and high temperature resistance. (The electrical energy is directly converted into light energy, and the heat generation is small, which can be touched by hand)

                    (5) Small size: The designer can change the lamp mode at will to make the car diversified. Car manufacturers favor LEDs, which is entirely determined by the advantages of LEDs themselves.

                    (6) Good stability: LED has strong anti-shock performance, resin package, not easy to crack, easy to store and transport.

                    (7) High luminous purity: clear and vivid colors, no need for lampshade filtering, light wave error is within 10nm.

                    (8) Fast response time: no need for hot start time, light can be emitted within a few μs, and traditional glass bulbs have a delay of 0.3s, which can effectively prevent rear-end collisions and ensure driving safety when used for tail lights.