Blog spletnega mesta

vidno vsem

New Technology Non Channel 755nm 808nm 1064nm Diode Laser for Painless Hair Removal Machine

Lasted technology Non-channel 808nm/755nm/1064nm 3 wavelength laser Hair removal machine equipped with Germany imported laser chips (Jenoptik ) & higher power treatment handle. Our device utilizes upgraded technology Non-channel laser system , which brings more highly effective treatment result and comfortable feeling. As the lower demand of the water temperature, the laser handle can tolerate the high temperature at 60°C so that machine can work well at room temperature 50°C . Even the temperature gets higher in summer day , it can work continuously for 12-24 hours without any problem .Non- Channel Diode Laser ensures longer working hours than any other technologies 808nm diode laser in the market . You will never suffer from the handle - burning problems again and again! ! ! The laser handle is up to 20,000,000 shots with 3 different spot size 15mm*15mm /20mm*25mm / 25mm*31mm for your optional.

CE Approved Hair Removal Machine Working Principle :                                     

Laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.Painless, easy operation, the most safe technology for permanent hair removal nowadays. 808 laser hair removal device adopts 808nm/755nm/1064nm, 3 wavelength particularly effective to hair follicle melanocytes without injury surrounding tissue. The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature. When the temperature raises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal .

More information you can click here

If you want to konw the 808nm diode laser price, please contact me

755nm Wavelength:
For the widest range of hair types and color. The Alexandrite wavelength offers more powerful energy absorption by the melanin chromophore, making it ideal for the widest range of hair types and color- especially light-colored and thin hair. With more superficial penetration, the 755nm wavelength targets the Bulge of the hair follicle and is especially effective for superficially embedded hair in areas such as the eyebrows and upper lip.
 808nm Wavelength:
Standard wavelength in diode laser hair removal machine is 808 nm . It offers deep penetration of the hair follicle with high average power, a high repetition rate and a large spot size for fast treatment. The 808 nm has a moderate melanin absorption level making it safe for darker skin types. Its deep penetration capabilities target the Bulge and Bulb of the hair follicle while moderate tissue depth penetration makes it ideal for treating the arms, legs, cheeks and beard.
 
1064nm Wavelength:

Specialized for darker skin types. 
The YAG 1064 wavelength is characterized by lower melanin absorption, making it a focused solution for darker skin types. At the same time, the 1064nm offers the deepest penetration of the hair follicle, allowing it to target the Bulb and Papilla, as well as treat deeply embedded hair in areas such as the scalp, arm pits and pubic areas. With higher water absorption generating a higher temperature, the incorporation of the 1064nm wavelength increases the thermal profile of the overall laser treatment for most effective hair removal.

Non-channel chips handle :

1.Lasted technology--Non channel chips handle
2.Let alone life span of the laser handle is upgraded to 20,000,000 shots
3.4 size spot for your reference, 15*15mm/15*20mm/20*25mm/25*31mm

Our laser hair removal machine utilizes upgraded technology Non-Channel instead of micro-channel or macro-channel handle .Because of special chips arrangement non-channel handle can take up the water temperature 55ºC, while both micro and macro channels can only take maximum 35ºC.What's more, Non-channel handle support the maximum current 130 A. Micro-channel and macro-channel can only take 60Aand 40Arespectively.For that reason the upgraded diode laser ensures longer working hours than other technologies on the market., and you never will have to suffer from the handle-burning problems again and again.

laser hair removal machine

Komentarji

     
    vidno vsem

    The elbow is a kind of connection fittings commonly used in pipeline installation. It connects two pipes with the same or different nominal diameters to make the pipe turn at a certain angle. Elbows are widely used in pipeline construction and have irreplaceable functions, but do you know the technology of elbows, today stainless steel pipe bend supplier will tell you what technical requirements the elbows have.

    First of all, because most of the pipe parts are connected by welding, in order to improve the welding quality, the ends are turned into bevels, leaving a certain angle and a certain edge. The welding technology requires stricter, thicker and more angle The amount and the deviation range are all specified. For the convenience of welding, the general pipe fittings and the connected pipes need the same steel type.

    Reducer-1.jpg

    Secondly, all pipe fittings need to undergo surface treatment. The iron oxide on the inner and outer surfaces needs to be removed by special treatment, and then coated with anticorrosive paint. This is to facilitate transportation and prevent rust and oxidation. Not only that, the export also needs to do this work .

    The final elbow also has certain requirements for packaging. For small pipe fittings such as elbows, about 1 cubic meter of wooden box is required for export, and it is stipulated that the number of elbows in this box cannot exceed one ton, but this kind of Standard sets are allowed, that is, large sets are small, but the total weight generally cannot exceed 1 ton. For large pieces of pipe, a single package is required. In addition, the package mark is marked with the size, steel number, batch number, manufacturer's trademark, etc.

    Our company provides 1/2" stainless steel Pipe Bend.


    Komentarji

       
      vidno vsem

      Pipe Bend suppliers share with you.

      3.Centrifugal cast composite ceramic tube

      This process adopts the method of self-propagating centrifugal casting, which mainly uses the chemical reaction of the substance itself to generate high temperature by exothermic combustion and synthesize new substances in the process of combustion wave propagation.

      The ceramic surface of the ceramic composite pipe formed by this method replaces the ceramic layer. Compared with carbon steel and manganese steel pipes, the wear resistance is improved to a certain extent, but because the reaction temperature is not high (average does not exceed 1200 ° C), it is also oxidized. Aluminum, but the high temperature phase alumina and low temperature phase alumina are very different in terms of strength, hardness and density. Due to the short reaction time, the low temperature phase alumina and molten iron were not completely centrifuged, resulting in a dense ceramic layer, loose particles and low hardness. The wear-resistant elbow is lining 95 ceramics, the alumina content is not less than 95%, and all of them are high-temperature phase α-Al2O3, and the sintering temperature is as high as 1670 ° C to ensure the material quality. Judging from the actual anti-wear effect, the durable time of the wear-resistant elbow is more than 5 times that of the composite ceramic elbow.

      Bend-2.jpg

      Moreover, the technology of centrifugal casting of composite ceramic pipes determines that they are not suitable for elbows and small and large heads. Under ordinary technical conditions, composite ceramic pipes can only be made into straight tubes. To make elbows or small and large heads, straight tubes must be divided into several Section welding, the inner wall of the elbow and the large and small head after molding is not a streamlined structure, which hinders material transportation and reduces equipment output.

      At the same time, the ceramic tube produced by this process has many micro-cracks, is brittle and brittle, and is easy to fall off and fail locally, and cannot be repaired after falling off.

      In addition, from the perspective of the bearing capacity of the entire boiler, cast steel elbows and composite ceramic elbows all win by weight and thickness. Some elbows have a wall thickness of more than 40 millimeters. From the perspective of the unit design, no doubt Hanger increases weight and shortens service life.

      In other words, the price of an alloy elbow is twice that of a wear-resistant ceramic elbow. With the cost of an alloy elbow, you can buy two wear-resistant ceramic elbows. The service life of the wear-resistant ceramic elbow is this alloy. 2-3 times the elbow, use the price-to-life ratio, that is, use a 1/5 alloy elbow to buy a wear-resistant ceramic elbow.


      Komentarji

         
        vidno vsem

        The wear-resistant elbow can be favored by the market and continue to replace some traditional anti-wear materials. The fundamental reason is its excellent product quality and its comparison with traditional anti-wear materials such as cast stone, cast steel and centrifugal casting ceramic materials. Has many advantages. Then how to distinguish the wear-resistant elbow from the traditional elbow, the following cheap Pipe Elbow suppliers will tell you the difference between the two kinds of elbows from the following two aspects.

        Anti-Corrosion Pipe Elbow

        Performance comparison

        1.Cast stone

        In the past, most of the elbows in each factory were made of cast stone elbow. This material is characterized by fragility, cracking, and wear-resistant backpacks. The wall thickness is 25-35 mm, and some are nearly 40 mm. After cracking, the pulverized coal wears out along with the gap, and its life span is only one overhaul period. In addition, there are often air holes in the interior, which are easy to leave hidden dangers. Once worn, the site cannot be repaired.

        2.cast steel

        Cast steel (including alloy steel) is widely used in the field of anti-wear, and its manufacturing process is relatively simple. However, due to material performance limitations and process limitations, the surface hardness (approximately 60) of cast steel materials is much lower than that of ceramics (above 80), and the wear resistance is only equivalent to a few tenths to lower of ceramics. The manufactured elbow may be worn through after being put into operation for more than one year. In addition, cast steel pipelines are thick, very heavy, and have a high carbon content, which results in poor weldability. Heat treatment of the welds on site is required, which brings considerable difficulties to site installation and maintenance.

        Our company provides anti-corrosion Pipe Elbow.


        Komentarji

           
          Slika od Huibo Du
          od Huibo Du - sreda, 1. julij 2020, 03:55
          vidno vsem

          Elbow can be divided into stainless steel elbow and carbon steel elbow according to different materials. Although the stainless steel material can keep the surface of the stainless steel elbow from being corroded and rusted for a long time. But stainless steel does not need to be cleaned. Some people may think that cleaning up stainless steel is just fine. In fact, this is not the case. There are also points of attention in stainless steel cleaning. Today, the carbon steel Pipe Bend suppliers will talk to you about the main points of cleaning stainless steel elbows.

          1. The cleaning of stainless steel elbow needs to be cleaned by alkali cleaning, water-soluble cleaning agent, chlorine solvent blasting or shot peening according to different surface conditions and workpiece requirements.

          Stainless Steel Elbow

          2. Generally, for the cleaning of stainless steel elbow, pickling method is used. Correct cleaning can effectively improve the safety performance of stainless steel elbow and prolong its service life.

          When welding the elbow, the electrode should be kept dry. This can prevent the surface of the electrode from being contaminated with oil or other dirt, which can increase the carbon content of the weld or affect the quality of the weldment. Not only that,

          When the elbow is welded, if it is repeatedly heated, it will precipitate carbides, reduce corrosion resistance and mechanical properties, and have high hardenability after welding, and easily crack.

          Therefore, if the same type of electrode is used for welding, pre-heating above 300 ° C and slow cooling around 700°C after welding are required. This is an important step related to welding quality and must not be skipped. If the weldment cannot be subjected to post-weld heat treatment, a chromium-nickel stainless steel electrode is required.



          Komentarji

           
          vidno vsem

          General outdoor water supply stainless steel tees should be dug well for drainage trenches, water collection wells, and pumping equipment, such as pumps, hoses, etc., in order to pump water during construction in rainy days, especially in the basement. The soil should be backfilled in time after completion.

          What should we do in a special period?

          (1) When asbestos cement interface is used, hot water mixing materials should be used, but the water temperature should not exceed 50℃.

          (2) When the temperature is lower than -5℃, the above two data interfaces are not suitable.

          (3) After the interface is completed, it can be cured by sealing with muddy mud mixed with salt water, and covering the grass curtain.

          (4) During the pressure test, the exposed pipes or connections should be tightly covered with grass curtains, and the pipe body without the connection should be backfilled. After the pressure test is completed, the water should be drained as soon as possible. Do well the preparation work before pressure test and drainage work after pressure test.

          Tee-3.jpg

          The steel pipe has a hollow cross-section, and is widely used as a pipeline for transporting fluid. Such as pipelines for transporting oil, natural gas, coal gas, water, and certain solid materials. Compared with solid steel such as round steel, steel pipe has a lighter weight when the flexural and torsional strength is the same. It is an economic cross-section steel and is widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipes, automobile transmission shafts, and bicycles. Frame and steel scaffolding for building construction.

          The use of steel pipes to make ring parts can improve the utilization rate of data, simplify the production process, save data and processing time, such as rolling bearing rings, jack sleeves, etc. At present, steel pipes have been widely used. Steel pipe or a variety of conventional pipe fittings can not lack of information. Steel tubes can be divided into round tubes and special-shaped tubes according to different cross-sectional shapes. Because the circle area is the largest when the circumference is flat, a circular tube can transport more fluid. In addition, when the circular cross-section receives internal or external radial pressure, the force is relatively uniform. Therefore, most steel tubes are round tubes. However, round tubes also have certain limitations.

          The above information is provided by pipe tee suppliers.



          Komentarji

             
            vidno vsem

            Pipe Bend suppliers share with you.

            7. The electrode should be connected and dried during the operation of the electrode. The titanium-calcium type should be dried at 150 ° C for 1 hour, and the low-hydrogen type should be dried at 200-250 ° C for 1 hour (can not be dried again and again, otherwise the coating will be easily cracked and peeled off). Beware of the electrode Coating oil and other dirt, so as not to increase the carbon content of the weld and affect the quality of the weldment.

            Reducer-1.jpg

            8. During welding of stainless steel pipe fittings, carbides are repeatedly heated to precipitate carbides, reducing corrosion resistance and mechanical performance.

            The common problems are as follows:

            1. Uneven wall thickness of stainless steel pipe fittings

            The uneven wall thickness of sanitary stainless steel pipe fittings mainly occurs in the parts where the stainless steel pipe is most deformed, such as the wall thickness at the back of the elbow is thinner than other parts; the wall thickness of the nozzle and the stainless steel pipe body are not the same. In order to check out these problems, calipers and other commonly used measuring tools are not easy to detect. At this time, only an ultrasonic thickness gauge can be used to detect them.

            2. Excessive hardness

            The problem of excessive hardness is mainly due to the heat treatment process after forming. The solution is to use the correct heat treatment process for another heat treatment.

            3. Inspection of stainless steel pipe fittings before delivery and after delivery

            As the last process to ensure the quality of sanitary stainless steel pipe fittings, inspection plays an important role, especially for stainless steel pipe fittings that withstand high temperatures and pressures and flammable and highly toxic media.

            Our company provides anti corrosion Pipe Bend.



            Komentarji

               
              vidno vsem

              On April 21, 2020 , a container DRIPLINE WITH FLAT DRIPPER  and DRIP TAPE WITH CONTINUOUS LABYRINTH loaded in time as negotiated. It will ship to Callo, Peru.

              The order includes 0.15mm, 0.18mm, 0.2mm dripline with flat dripper and also 0.15mm, 0.2mm drip tape with continuous labyrinth.

              In order to facilitate agent and distributor of our oversea customers, Plentirain provide customers with Plentirain brand package, customized package and also neutral package. OEM & ODM is available.

              Hebei Plentirain Irrigation Equipment Technology Co., Ltd. is a company, specializing in the R&D, production and sales of agricultural micro irrigation (drip irrigation and mini sprinkler irrigation) products.  At present, our customers have been all over most domestic provinces & cities and also more than 40 countries. High quality products, fastest delivery time and standardized service are our competitiveness.

              Plentirain will beyond your expectation always. Welcome new and old customers contact us for order plan.

              Below is the loading pictures:

              Agricultural Micro Irrigation

              Agricultural Micro Irrigation


              Komentarji

                 
                vidno vsem

                On March 18, 2020 , two containers drip tape loaded. On March 19, 2020 one container loaded. All the threes containers drip tape ship to BANGKOK PAT, THAILAND in time as negotiated.

                In order to facilitate agent and distributor of our oversea customers, Plentirain provide customers with Plentirain brand package, customized package and also neutral package. OEM & ODM is available.

                Hebei Plentirain Irrigation Equipment Technology Co., Ltd. is a company, specializing in the R&D, production and sales of agricultural micro irrigation (drip irrigation and mini sprinkler irrigation) products. At present, our customers have been all over most domestic provinces & cities and also more than 40 countries. High quality products, fastest delivery time and standardized service are our competitiveness.

                Plentirain will beyond your expectation always. Welcome new and old customers contact us for order plan.

                Below is the loading pictures:

                Agricultural Micro Irrigation

                Agricultural Micro Irrigation

                Agricultural Micro Irrigation

                Agricultural Micro Irrigation

                Agricultural Micro Irrigation


                Komentarji

                   
                  vidno vsem

                  On March 21, 2020 , a container accessories  and drip tape in 0.15mm, 0.18, 0.2mm thickness loaded in time as negotiated.

                  In order to facilitate agent and distributor of our oversea customers, Plentirain provide customers with Plentirain brand package, customized package and also neutral package. OEM & ODM is available.

                  Hebei Plentirain Irrigation Equipment Technology Co., Ltd. is a company, specializing in the R&D, production and sales of agricultural micro irrigation (drip irrigation and mini sprinkler irrigation) products. At present, our customers have been all over most domestic provinces & cities and also more than 40 countries. High quality products, fastest delivery time and standardized service are our competitiveness.

                  Plentirain will beyond your expectation always. Welcome new and old customers contact us for order plan.

                  Below is the loading pictures:

                  Agricultural Micro Irrigation

                  Agricultural Micro Irrigation

                  Agricultural Micro Irrigation


                  Komentarji