Blog spletnega mesta

vidno vsem

Lasted technology Non-channel 808nm/755nm/1064nm three wavelengths diode laser with Germany imported laser chips (Jenoptik ) & higher power treatment handle. Our device utilizes upgraded technology Non-channel laser system , which brings more highly effective treatment result and comfortable feeling. As the lower demand of the water temperature, the laser handle can tolerate the high temperature at 60°C so that machine can work well at room temperature 50°C . Even the temperature gets higher in summer day , it can work continuously for 12-24 hours without any problem .It ensures longer working hours than any other technologies 808nm diode laser in the market . You will never suffer from the handle - burning problems again and again! ! ! The laser handle is up to 20,000,000 shots with 3 different spot size 15mm*15mm /20mm*25mm / 25mm*31mm for your optional.

808nm diode laser Working Principle :                                     

Laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.Painless, easy operation, the most safe technology for permanent hair removal nowadays. laser hair removal machine adopts 808nm/755nm/1064nm, 3 wavelength particularly effective to hair follicle melanocytes without injury surrounding tissue. The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature. When the temperature raises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal .

laser hair removal machine 755nm Wavelength:
For the widest range of hair types and color. The Alexandrite wavelength offers more powerful energy absorption by the melanin chromophore, making it ideal for the widest range of hair types and color- especially light-colored and thin hair. With more superficial penetration, the 755nm wavelength targets the Bulge of the hair follicle and is especially effective for superficially embedded hair in areas such as the eyebrows and upper lip.
 

808nm Wavelength:
Standard wavelength in underarm laser hair removal Machine is 808 nm . It offers deep penetration of the hair follicle with high average power, a high repetition rate and a large spot size for fast treatment. The 808 nm has a moderate melanin absorption level making it safe for darker skin types. Its deep penetration capabilities target the Bulge and Bulb of the hair follicle while moderate tissue depth penetration makes it ideal for treating the arms, legs, cheeks and beard.
 cheap laser hair removal machine China
1064nm Wavelength:
Specialized for darker skin types. 
The YAG 1064 wavelength is characterized by lower melanin absorption, making it a focused solution for darker skin types. At the same time, the 1064nm offers the deepest penetration of the hair follicle, allowing it to target the Bulb and Papilla, as well as treat deeply embedded hair in areas such as the scalp, arm pits and pubic areas. With higher water absorption generating a higher temperature, the incorporation of the 1064nm wavelength increases the thermal profile of the overall laser treatment for most effective hair removal.

Non-channel chips handle :

1.Lasted technology--Non channel chips handle
2.Let alone life span of the laser handle is upgraded to 20,000,000 shots
3.4 size spot for your reference, 15*15mm/15*20mm/20*25mm/25*31mm
Our CE Approved Hair Removal Machine upgraded technology Non-Channel instead of micro-channel or macro-channel handle .Because of special chips arrangement non-channel handle can take up the water temperature 55ºC, while both micro and macro channels can only take maximum 35ºC.What's more, Non-channel handle support the maximum current 130 A. Micro-channel and macro-channel can only take 60Aand 40Arespectively.For that reason the upgraded diode laser ensures longer working hours than other technologies on the market., and you never will have to suffer from the handle-burning problems again and again.

CE Approved Hair Removal Machine Advantage :

 1.755 808 1064nm diode laser, completely safe and painless & permanent .
2.Up to 10Hz repetition rate with a big spot size ,which provides you with a fast and efficient treatment by saving time and cost.
3.With outstanding TEC cooling system,which can keep the machine working 12 hours continuously as well as a good painless feeling during the treatment.
when the water temperature exceed 50 centigrade, the machine will automatically shut down.
4.DC diaphragm pump : 5L/min, pressure 60psi,  Suction head lift 5 meter , high lift 50 meter, ensure good water circulation.
5.Filters used can keep all the impurities and ion out of water to avoid the damage possibility of the laser bar .        
6.Copper radiator : with SUS316 stainless steel water pipes in side, offer better anti-rust resistance, to ensure the purity of the water, besides, the copper is better in heat dissipation .
7.The optical lense never gets foggy
8.Up to 20,000,000  laser shots 

808nm diode laser Application:
755nm, most effective on white and more light color skin type
1064nm, made for treating darker and black color skin types
808nm, most effective for white to medium tan color skin types
All unwanted hair parts of the body, such as lip hair, whiskers, armpit hair, body hair, bikini hair.

Wavelength

808nm, 755nm, 1064nm

Working frequency

1~10hz

Energy density

1-120J/cm²

Handle piece cooling

TEC+Sapphire

TEC cooling

12V6A

Spot size

15*15mm/15*20mm/20*25mm/25*31mm  ( optional )

Output power

600W,900W,1200W  ( optional )

Laser chips

Germany laser Jenoptik,150W/piece

Pulse width

5ms~400ms

Output mode

Pulse output

Language

English ,Spanish ,Turkish, Russia ,German

Packing size:

56x58x114cm  / GW:66KG   ( Wooden case Packing )

display

10'4 color touch screen

Protective temperature

55ºC interface select

Water pump

DP-60 diaphragm rods 12V

Flow sensor

3.5L/min flow requirement

Water level switch

Test water level

Cooling system

240×120cooling line(2pc),18 pcs channel

Cooling fan

4pcs fans,speed 3150r/min

Case material

ABS shell/metal shell

Inter structure

White zinc hob/color zinc hob

Water tank volume

3.6L

Environmental moisture

< 80%

Environment temperature

Air conditioning room,temperature≤28ºC

Voltage

110V/220V

three wavelengths diode laser

Komentarji

     
    Slika od Wendy Li
    od Wendy Li - torek, 26. maj 2020, 10:55
    vidno vsem

    Anti-static aluminum foil bag

    Moisture-Proof Bag

    PE Anti-Static Aluminum Foil Bag

    Information:

    Anti-static aluminum foil bag is also known as anti-static    moisture-proof shielding aluminum foil vacuum bag, aluminum foil bag, vacuum bag, moisture-proof bag and so on.

    Product appearance: silver white, matt and bright.

    Features: Anti-static, anti-electromagnetic interference, moisture-proof three functions, Faraday cage structure, shielding barrier up to 60db, strong electrostatic protection, inner layer of pure metal aluminum, resistivity less than 0.1Ω, four layers Strong structural composite ability, firm sealing, good waterproof, oxygen barrier, light protection and puncture resistance.

    Material structure of Leader Tape: antistatic layer (PET) / aluminum foil layer (shield moisture barrier) / PET / antistatic layer (PP or PE)

    Product performance: electrical and physical properties meet international standards such as ASTTMD257, EIA541, MIL-B-81705

    Conventional thickness: 100μm, 120μm, 140μm

    Surface resistance: 10-11 Ω of 10

    Bag style: flat pocket, self-sealing (tight bag / zipper bag), envelope type, envelope self-adhesive, one-piece, three-dimensional, etc., the bag body pattern can be printed according to customer requirements.

    Product use of Smart Card Chip Guide Tape: Suitable for electronic product packaging with moisture-proof requirements: various PC boards, IC integrated circuits, optical drives, hard disks, vacuum packaging of chemical raw materials and biological intermediates, etc.


    Komentarji

       
      Slika od Vicky Wu
      od Vicky Wu - torek, 26. maj 2020, 10:53
      vidno vsem

      Driving on the road all year round, especially at night, I often encounter the dim or "one-eyed" lights of some cars, but also our own cars suddenly dim or do not light. what's going on? Is it the quality of the bulb or something else?

      Automobile LED headlights supplier to share with you: In fact, as a car lamp, it also has a "life", or a usage decay period of working conditions. The brightness will gradually decrease during long-term use, and eventually become dim or even not bright. These are the times when the lights need to be replaced.

      So how long can our car lights last, and how long do they last? Let's talk about different automotive LEDs.

      The most common are halogen headlights, which are also the longest in service in automotive history. The basic luminous principle of the halogen lamp is the same as that of the incandescent lamp. Both of them conduct sufficient current to the tungsten wire to heat the filament to the incandescent state and emit light.

      The difference is that the small quartz glass case of halogen lamps is filled with halogen element iodine or bromine gas. The presence of these halogen elements can reduce the loss of tungsten filaments at high temperatures, extend the life of the filaments, and make the filaments work higher. Temperature, so as to obtain higher brightness, color temperature and luminous efficiency. At present, the headlights on most economical family cars are halogen lamps.

      Longer life is due to the addition of iodine and bromine into the bulb. The tungsten wire will sublimate into a gas when it glows and is heated. The sublimed tungsten wire will react with the two halogen gases, iodobromide, and eventually become tungsten wire. In this way, the tungsten wire will not easily burn out. . Therefore, it is not a problem for our current halogen headlamps to accumulate 300 hours.

      Therefore, when changing the halogen headlights, it is required to carry out construction with gloves, because the grease on the fingers left on the glass surface of the bulb will cause the temperature to vary and easily burst.

      The advantage of halogen lamps is that the production technology is mature and the cost is relatively low. Therefore, there are still many models in assembly today, but the disadvantage is that the brightness is not enough. So many partners are willing to upgrade halogen lamps in the later stage. Such as upgrading xenon lamps

      The principle of the xenon lamp is to fill the crystal quartz glass tube with xenon gas (filled with iodide, and instantly boost the 12 volts DC voltage to 23,000 volts through a supercharger, and the high voltage amplitude excites the xenon electrons in the quartz tube to be free. A light source is generated between the two electrodes, and a white super-strong arc light generated by xenon gas.

      Automotive Led Headlights

      Automotive Led Headlights

      The current required for HID to work is only 3.5A, the brightness is three times that of traditional halogen bulbs, and the service life is 10 times longer than that of traditional halogen bulbs. It also reaches a power of 55w, and the power consumption of xenon lamps is half that of halogen lamps. Use can reach 3000 hours.

      Our original car xenon lamp can reach the above normal service life, but it may not necessarily be upgraded and modified later. This depends on the quality of the lamp you bought, the technical requirements for installation and construction, and the reliable store can be upgraded more comprehensively. The choice and installation of ballasts will also be relatively strict.

      Because the stabilizer is added in the later upgrade, the stabilizer will be an important factor that affects the service life. Ordinary upgrade and modification can not achieve the original level. Life will be longer than halogen lamps. So we must pay attention to this when choosing to upgrade, we must consider the choice of cost performance and installation technology.

      Finally, we talk about automotive LED headlights. There is no doubt that the use of LEDs will become the trend of future cars. This is due to the high brightness of LEDED lamps, low power consumption, and almost no burnout. However, the price is more expensive, and less used for family cars. It is more used in high-end cars and luxury cars. Since it must be expensive, its service life can reach 60,000 to 100,000 hours. It is likely that our cars are scrapped. The lights won't break.

      There are so many advantages of LED lights, but you must pay attention to changing LED lights. The heat dissipation is a problem when applied to car lights. If the heat dissipation is not good, the light decay will be very serious. Friends who want to change must design a good cooling solution.

       


      Komentarji

         
        vidno vsem

        Being illuminated by high beams, I believe many drivers will encounter them every night. Turning on high beams when meeting or following in the city will seriously affect the sight of other drivers. Therefore, in urban areas, as far as possible, open the far light as little as possible, and the correct use of far and near light exchange is an important guarantee for civilized driving.

        And sometimes these vehicles that seem to turn on the high beam are actually turned on with low beam, but its high beam is relatively high. Whether the headlights are too high or too low in daily driving is not conducive to driving safety. Let's take a look at how to adjust the height of the automobile low beam yourself.

        Led Auto Headlights

        Led Auto Headlights

        1.The headlights are misaligned after a slight impact

        2. Replacement of headlight parts causes misalignment

        3.The headlight height is wrong / displaced due to other reasons

        When we are driving normally, observe the height of the low beam headlights. If the tangent line reaches the position above the rearview mirror of the car in front, then the height of the low beam headlights is definitely wrong. In addition, if the dipped beam is turned on to illuminate the wall, the tangent positions of the left and right dipped beams do not coincide, then the position is wrong. The position of the standard dipped headlights is that the left and right headlights tangent coincide. The tangent of a single dipped headlight is left low and right high, instead of the so-called "left low right high" of the left and right headlights.

        Of course, many people will say why not directly go to the 4S shop for maintenance adjustment. It is undeniable that this is the simplest and most effective. However, some 4S stores are relatively remote, and it is not difficult to adjust the height of the low beam. DIY is not a good idea.

        It should be noted that the adjustment of the width of the light is difficult, and it is not recommended to adjust it by yourself. If the width of the light is really inappropriate due to collision or other reasons, it is recommended to go to the 4S shop for timely adjustment.

        Preparation tools: adhesive tape, Phillips screwdriver or hexagon socket for marking purposes, flashlight, tape measure

        Location: Underground parking white wall

        First, find a clean wall, park the car about 3 meters from the wall, and measure the distance from the center of the vehicle's low-beam light to the ground. Based on the height of the low beam headlight that we measured above the ground, we used tape to set a baseline on the wall in front of the car. (The reason why the tape is set is because the tape can be easily removed after use to avoid embossing the wall.) The standard for adjustment is that the tangent is slightly lower than the mark, and the method of the left and right headlights is similar.

        In addition, if your car has a headlight height adjustment knob, you should first adjust the headlight height adjustment knob to the "0" position before adjusting the headlight.

        Find the adjustment bolts behind the headlight assembly. The adjustment bolts around many models are toothed. It is easy to judge that the parts that need to be adjusted and the tools used are different for different models, and need to be determined according to the specific model.

        It should be noted that some car lights are integrated with near and high beams, so there are generally two adjustment bolts for height adjustment and width and width; while independent near and high beam headlights can adjust the height of the low and high beams, respectively. It can also adjust the width and width, so there may be 3-4 adjustment bolts.

        When adjusting, twist the bolt with one hand, observe the change of the tangent position on the wall, and adjust according to the height of the mark. The tangent height of the low beam is lower than the reference line as the standard.

        When adjusting led auto headlights, do not sit on the car or sit alone in the car. If the trunk is pulled with a lot of weight or the car is fully loaded, the height of the vehicle will drop a lot. There is no small effect.

        We are China led auto headlights manufacturer, if you have any demand for our products, please feel free to contact us.



        Komentarji

           
          vidno vsem

          Automobile atmosphere lamps are indispensable as night lighting lamps. With the development of LED, more and more car manufacturers have adopted LED headlights as the first choice for car lights. LED car light refers to the use of LED technology for both interior and exterior light sources for external and internal lighting. External lighting equipment involves thermal limits and EMC issues, as well as many complex standards for off-load testing. LED car lights can be widely used to create the environment inside the car.

          Structure of Mi2 automobile LED headlights:

          A single LED is composed of gold wire, LED chip, reflection ring, cathode wire, plastic wire, and anode wire.

          The core of the light-emitting diode is a wafer composed of a p-type semiconductor and an n-type semiconductor. There is a transition layer between the p-type semiconductor and the n-type semiconductor, which is called a pn junction.

          In the PN junction of some semiconductor materials, the injected minority carriers and the majority carriers will release excess energy in the form of light, thereby directly converting electrical energy into light energy. A reverse voltage is applied to the pn junction, and minority carriers are difficult to inject, so it does not emit light. This type of diode made using the injection-type light-emitting principle is called a light-emitting diode, and is commonly called an LED.

          The lighting process of LED includes three parts:

          Carrier injection, composite radiation, and light energy transmission under forward bias.

          22.jpg

          Automotive Led Work Lights

          Tiny semiconductor wafers are encapsulated in a clean epoxy resin. When the electrons pass through the wafer, the negatively charged electrons move to and recombine with the positively charged hole area. Photons are generated while the electrons and holes disappear.

          The greater the energy (band gap) between the electron and the hole, the higher the energy of the photon produced. The energy of the photon in turn corresponds to the color of the light. Within the spectrum of visible light, blue light and purple light carry the most energy, and orange light and red light carry the least energy. Because different materials have different band gaps, they can emit different colors of light.

          When it is in the forward working state (that is, the forward voltage is applied to both ends), when the current flows from the LED anode to the cathode, the semiconductor crystal emits different colors of light from ultraviolet to infrared. The intensity of the light is related to the current. For example, an LED is like a burger. The material that can emit light is the "meat pie" in the sandwich, and the upper and lower electrodes are bread with meat. And through the research on the light-emitting materials, people have gradually developed a variety of light color, light efficiency LED components are getting higher and higher, but no matter how changed, the overall light-emitting principle and structure of LED has not changed much.

          Advantages of automotive LED work lights:

          (1) Energy saving: The light-emitting diode directly converts electrical energy into light energy. The power consumption is only 1/10 of that of traditional lamps, which can better reduce fuel consumption and protect automobile circuits from being burned by excessive load current.

          (2) Environmental protection: There is no ultraviolet and infrared in the spectrum, there is no heat generation, no radiation, little glare, and the waste is recyclable, contains no mercury elements, no pollution, and can be safely touched. It is a typical green lighting source.

          (3) Long life: there are no loose parts in the lamp body, and there are no shortcomings such as easy burning, thermal deposition, and light decay of the filament. Under the appropriate current and voltage, the service life can reach 80 ~ 100,000 hours, which is longer than the life of traditional light sources. More than 10 times longer. (There is a replacement, the characteristics of lifetime use)

          (4) High brightness and high temperature resistance. (The electrical energy is directly converted into light energy, and the heat generation is small, which can be touched by hand)

          (5) Small size: The designer can change the lamp mode at will to make the car diversified. Car manufacturers favor LEDs, which is entirely determined by the advantages of LEDs themselves.

          (6) Good stability: LED has strong anti-shock performance, resin package, not easy to crack, easy to store and transport.

          (7) High luminous purity: clear and vivid colors, no need for lampshade filtering, light wave error is within 10nm.

          (8) Fast response time: no need for hot start time, light can be emitted within a few μs, and traditional glass bulbs have a delay of 0.3s, which can effectively prevent rear-end collisions and ensure driving safety when used for tail lights.


          Komentarji

             
            vidno vsem

            Нашето училище предлага курсове и частни уроци по математика в София и Пловдив. Занятията са за ученици от 1 до 12 клас. Нашите математици са се доказали през годините като професионалисти.

            https://kursovezavseki.com/matematika/

            [ Spremenjeno: torek, 26. maj 2020, 12:22 ]

            Komentarji

               
              vidno vsem

              Fainting may have a variety of causes. A simple episode, also called a runescape gold 2007 vasovagal attack or neurally mediated syncope, is the most common type of fainting spell. It is most common in children and young adults. A vasovagal attack happens because blood pressure drops, reducing circulation to the brain and causing loss of consciousness. Typically an attack occurs while standing and is frequently preceded by a sensation of warmth, nausea, lightheadedness and visual "grayout." If the syncope is prolonged, it can trigger a seizure.

              Players take control of an apprentice wizard in the world of Spiral and must gain levels, spells and equipment while completing quests and exploring the game world. Wizard101 also features premium items and benefits that are available through Wizard101 Crowns or a Wizard101 membership although a decent amount of gameplay is accessible for free.

              The investor's risk on a Mini account offsets the lower risk of losses which are 10% the amount that would be lost on a regular Forex trade. This actually makes it easier to run a trading strategy that is more disciplined. So you see why you should get started with a Mini Forex Trading account?

              Unless your bankroll is the size of the gross domestic product of a small nation, it is wise for participants to set clear limits with strict time limits and budgets. It all too easy to languish in a virtual fantasyland, lose track of time, and lose track of the amount of money bet on online slot gambling.

              Right? People had been boisterous over a period about like they were knee deep in the conversation and never been out of the book for even a second. FTTH is one of the latest technologies that Tripleplay use to provide high speed broadband service to their internet users. A major trend that contributes to this are people working from home, through the convenience of wired and wireless networks.

              Awez, who has previously spoken up about the horrific impact of losing a close friend to knife crime, said: "A lot of people think that if they are not carrying a knife, the other person will be. They think they are evening the odds, they think: they do pull a knife out then I will be armed too But the consequences are massive, and we are going out to share those stories."

              Magnetic Profit System Scam? SHOCKING REAL REVIEW!!!Suggest Topic For Review. The Digital Millionaire Secret Scam Exposed: The Onpointing Scam Public Millionaire FX Sniper Signal Snipe HBSwiss Software Tera App Traders Matrix Duplicash App Copy My Websites Review Daily Income Method Guaranteed Money System Review Binary Option Club Step 2 Wealth Review CFD Society Scam Exposed Revenge Profits Forex Maverick Scam Alert FXOpen Review Fintech Profits Review United Trading Network Scam Review StoxMarket Broker Review XM Broker Scam Traders Buddy Review Daweda Exchange Binary Robot Scam Exposed Nuvo Finance Review DirectFX Review Plus Broker Review: Good Scam Cover up or Trusted?

              As summer is coming, the Ready for Summer 2020 event is active now on RSorder with special offers - 6% discount for OSRS gold, RS gold and all other products for everyone, and double Loyalty Points for RSorder members until May 27, 2020.

               

              Notes:

              6% off code "RMS6" for All orders.

              Every 100 Loyalty Points can be used as $1.

               

              Besides, 5% off code "RSYK5" is also offered for Osrs gold / Runescape 3 Gold and all other products. Buy from https://www.rsorder.com/ at anytime.


              Komentarji

                 
                vidno vsem

                Recently a World of Warcraft player named Rextroy is very famous. Because he shared many talented game strategies in the World of Warcraft game community, making World of Warcraft more interesting. For example, last week he killed a raid boss by using a specific game mechanic. Recently, Rextroy came up with a way to increase damage in PvP battles. This method allows him to kill high-level players with a single blow while the character is naked. I know this sounds unbelievable, but as long as you continue reading this article, you can understand why Rextroy can do this. If you draw enough inspiration from his method, in the future, you may be able to discover your own World of Warcraft game skills.


                What's impressive is how Rextroy is ready to govern a number of World of Warcraft's PvP balancing systems to try to the impossible. Typically, players are only ever nearly as good because the armor they wear, which provides big boosts to your Cheap WOW Classic Gold character stats like strength, agility or intellect. But Rextroy doesn't need armor to give enormous damage that reliably kills other players in one hit.


                That's because, within the Battle for Azeroth expansion, Blizzard implemented a scaling system in order that players wouldn't be obliterated by those sporting the simplest gear within the game. On the surface, the system makes lots of sense (and mostly works as intended): Players with worse gear are given a touch help in order that they still have a fighting chance if they run into unfriendly players while exploring the open world.


                But Rextroy discovered the system could even be exploited in some pretty hilarious ways. After stripping off all his gear, the PvP balancing would increase his damage by up to 226 percent. This big boost is offset by the very fact that a character's spells and attacks depend on stats to calculate their damage. Without armor to extend your stats, even your stronger attacks would do negligible damage.


                The trick, Rextroy discovered, is to instead use items, like grenades, because they are doing static amounts of harm no matter character stats and still have the benefit of the PvP balance buff. Pair that with some extra buffs that also increase your overall damage and an item that guarantees critical hits.


                Don't worry, when you read this article, the error has been fixed by Blizzard. Players who use Mandid Firebomb in the naked state will no longer receive a high damage bonus, and the bomb will not be available in some areas. But even so, when you find a naked hostile player rushing towards you in the wild area, stay away from him as much as possible, because you can't be sure if he has found another way to kill the enemy with one blow.


                Although the main reason for this problem is that Blizzard has designed a flawed enhancement mechanism to promote PvP balance, but for most players, this is acceptable. If you have the most basic understanding of World of Warcraft, you will know that this is an MMORPG that has been running smoothly for 15 years. The game is so old and huge that every time designer add new features and new systems to the game they need to consider the impact they may have on the inherent content of the game. However, some details are always missed. These details give Rextroy and similar players a certain advantage in a short time. In general, only people who are patient enough or even bored can discover these mechanisms that Blizzard ignores. You don’t have to worry about these things happening frequently. Importantly, enough Classic WOW Gold can solve the dilemma you currently encounter in the game. As long as you use WOW Classic Gold to buy better equipment in the auction house, you will have an advantage in the battle. MMOWTS is currently providing players with an inventory of WOW Classic Gold.

                Komentarji

                   
                  Slika od Wendy Li
                  od Wendy Li - torek, 26. maj 2020, 09:53
                  vidno vsem

                  Anti-static shielding bag

                  Shielding Bag

                  Shielding Bag Manufacturer

                  Information:

                  Anti-static shielding bag is also known as anti-static silver-gray shielding bag, shielding bag, anti-static PET plastic bag.

                  Product appearance: silver gray

                  Anti-Static Silver-Gray Shielding Bag features: high mechanical strength, good anti-static performance, excellent heat sealing, translucent, can be seen as a packaged object, the unique structure of the shielding bag can form the induction cover effect to protect the bag from the electrostatic field, prevent static electricity Accumulation, protection from static electricity, is the first choice for anti-static bags.

                  Material structure: antistatic layer (PET) / aluminized layer (shield layer) / antistatic layer (PP or PE)

                  Product performance: electrical and physical properties meet international standards such as ASTTMD257, EIA541, MIL-B-81705

                  Conventional thickness: 75μm, 100μm

                  Surface resistance: 10-11 Ω of 10

                  Bag style: flat pocket, self-sealing (tight bag / zipper bag), envelope type, envelope self-adhesive, one-piece, three-dimensional, etc., the bag body pattern can be printed according to customer requirements.

                  Use of Anti-static shielding bag: It is used for the packaging of various static sensitive products such as PC boards, electronic components, optical drives and ink cartridges.


                  Komentarji

                     
                    Slika od Wendy Li
                    od Wendy Li - torek, 26. maj 2020, 09:53
                    vidno vsem

                    Anti-static shielding bag

                    Shielding Bag

                    Shielding Bag Manufacturer

                    Information:

                    Anti-static shielding bag is also known as anti-static silver-gray shielding bag, shielding bag, anti-static PET plastic bag.

                    Product appearance: silver gray

                    Anti-Static Silver-Gray Shielding Bag features: high mechanical strength, good anti-static performance, excellent heat sealing, translucent, can be seen as a packaged object, the unique structure of the shielding bag can form the induction cover effect to protect the bag from the electrostatic field, prevent static electricity Accumulation, protection from static electricity, is the first choice for anti-static bags.

                    Material structure: antistatic layer (PET) / aluminized layer (shield layer) / antistatic layer (PP or PE)

                    Product performance: electrical and physical properties meet international standards such as ASTTMD257, EIA541, MIL-B-81705

                    Conventional thickness: 75μm, 100μm

                    Surface resistance: 10-11 Ω of 10

                    Bag style: flat pocket, self-sealing (tight bag / zipper bag), envelope type, envelope self-adhesive, one-piece, three-dimensional, etc., the bag body pattern can be printed according to customer requirements.

                    Use of Anti-static shielding bag: It is used for the packaging of various static sensitive products such as PC boards, electronic components, optical drives and ink cartridges.


                    Komentarji